Abstract:The microstructures, mechanical properties, and ablation behaviors of carbon-fiber reinforced carbon and ZrC–SiC ceramic matrix composites (C/C–ZrC–SiC) fabricated through reactive melt infiltration were systematically researched, of which preforms were densified using different substrate carbon: (i) resin carbon (RdC) and (ii) pyrolitic carbon (PyC) for comparison. The results showed that the densification process with pores that differ in location and size dominated the distribution of ceramic phases within pristine carbon-fiber reinforced carbon (C/C). In addition, the C/C–ZrC–SiC samples with different carbon substrates possessed different mechanical properties. The flexural strength of the C/PyC-ZrC-SiC composites was significantly higher, exhibiting a ductile fracture behavior, which is different from that of the brittle fracture model in C/RdC-ZrC-SiC composites. However, after being exposed to an oxyacetylene ablation torch at 2500 °C for 30–240 s, the C/RdC-ZrC-SiC composites exhibited better ablation resistances because there were more carbon matrix and carbide blocks per unit volume in the composites, and the structure of C/RdC-ZrC-SiC possessed a shorter healing time for pores during ablation. In other words, an integrated oxide scale on the ablated surface can be formed in a relatively shorter time. Therefore, the superior ablation behavior can largely be ascribed to the formation of dense oxides containing molten-like SiO2, which could effectively resist scouring and seal the pores promptly during ablation.

Microstructure and Ablation Behavior of SiC Coated C/C–SiC–ZrC Composites Prepared by a Hybrid Infiltration Process

Ablation Behavior of ZrC–SiC Coated C/C–ZrC–SiC Composites Prepared by Precursor Infiltration Pyrolysis Combined with Reactive Melt Infiltration

Microstructure and Ablation Performance of SiC–ZrC Coated C/C Composites Prepared by Reactive Melt Infiltration

Microstructure and Ablation Behavior of C/C-SiC-(ZrxHf1−x)C Composites Prepared by Reactive Melt Infiltration Method

Ablation Behaviors and Mechanism of ZrC-SiC-Si/SiC-Si Double-Layered Coatings on C/C Composite under Plasma Flame at 3000 °C

Mechanical Properties and Ablation Behavior of C/C-ZrC and C/C-ZrC-SiC Composites Prepared by Precursor Infiltration and Pyrolysis Combined with Chemical Vapor Infiltration

Preparation, Ablation Behavior and Mechanism of C/C-ZrC-SiC and C/C-SiC Composites

Effect of ZrC–SiC Content on Microstructure and Ablation Properties of C/C Composites

Ablation Behaviors of SiC Nanowire-Reinforced ZrC-SiC Coating-Matrix Integrated C/C Composites with Different Ratios of Precursors

Ablation Properties of C/C-ZrC-SiC Composites

Ablation Behavior and Mechanism of C/C–ZrC–SiC Composites under an Oxyacetylene Torch at 3000°C

Ablation Performances of Multi-Phased C/C-Zrc-Sic Ultra-High Temperature Composites

Preparation and Ablation Properties of SiC Nanowire-Reinforced ZrC–SiC Coating-Matrix Integrated C/C Composites

The Ablation Behavior and Mechanical Property of C/C-SiC-ZrB2 Composites Fabricated by Reactive Melt Infiltration

Preparation and Ablation Behavior of a ZrB2-SiC Coating-Matrix Integrated C/C Composite

Preparation and ablation properties of ZrC-SiC coating for carbon/carbon composites by solid phase infiltration

Microstructure and Ablation Property of C/C-ZrC-SiC Composites Fabricated by Chemical Liquid-Vapor Deposition Combined with Precursor Infiltration and Pyrolysis

Ablation Behavior of a C/C-ZrC-SiC Composite Based on High-Solid-loading Slurry Impregnation under Oxyacetylene Torch

Comparative Insights into C/C–ZrC–SiC Composites with Different Substrate Carbon on Microstructures, Mechanical Properties, and Ablation Behaviors

Ablation Properties of C/C-Zrc-Sic Composites by the Precursor Infiltration Pyrolysis

Ablative Property and Mechanism of SiC-CuxSiy Modified C/C-ZrC Composites Prepared by a Rapid Method