Abstract:The microstructures, mechanical properties, and ablation behaviors of carbon-fiber reinforced carbon and ZrC–SiC ceramic matrix composites (C/C–ZrC–SiC) fabricated through reactive melt infiltration were systematically researched, of which preforms were densified using different substrate carbon: (i) resin carbon (RdC) and (ii) pyrolitic carbon (PyC) for comparison. The results showed that the densification process with pores that differ in location and size dominated the distribution of ceramic phases within pristine carbon-fiber reinforced carbon (C/C). In addition, the C/C–ZrC–SiC samples with different carbon substrates possessed different mechanical properties. The flexural strength of the C/PyC-ZrC-SiC composites was significantly higher, exhibiting a ductile fracture behavior, which is different from that of the brittle fracture model in C/RdC-ZrC-SiC composites. However, after being exposed to an oxyacetylene ablation torch at 2500 °C for 30–240 s, the C/RdC-ZrC-SiC composites exhibited better ablation resistances because there were more carbon matrix and carbide blocks per unit volume in the composites, and the structure of C/RdC-ZrC-SiC possessed a shorter healing time for pores during ablation. In other words, an integrated oxide scale on the ablated surface can be formed in a relatively shorter time. Therefore, the superior ablation behavior can largely be ascribed to the formation of dense oxides containing molten-like SiO2, which could effectively resist scouring and seal the pores promptly during ablation.

Effect of ZrC–SiC Content on Microstructure and Ablation Properties of C/C Composites

Ablation Behaviors and Mechanism of ZrC-SiC-Si/SiC-Si Double-Layered Coatings on C/C Composite under Plasma Flame at 3000 °C

Ablation Behavior of ZrC–SiC Coated C/C–ZrC–SiC Composites Prepared by Precursor Infiltration Pyrolysis Combined with Reactive Melt Infiltration

Effects of Carbon Source on Ablation Property of C/C–ZrC–SiC Composites and SiC Coating under Plasma Flame

Microstructure and Ablation Behavior of C/C-SiC-(ZrxHf1−x)C Composites Prepared by Reactive Melt Infiltration Method

Enhanced Anti-Ablation Performance of Carbon/carbon Composites Modified with ZrC-SiC

The Ablation Behavior and Mechanical Property of C/C-SiC-ZrB2 Composites Fabricated by Reactive Melt Infiltration

Ablation Behavior and Mechanism of C/C–ZrC–SiC Composites under an Oxyacetylene Torch at 3000°C

Ablation Properties of C/C-ZrC-SiC Composites

Microstructure and Ablation Behavior of SiC Coated C/C–SiC–ZrC Composites Prepared by a Hybrid Infiltration Process

Ablation resistance and mechanism of SiC/ZrC-ZrB2 double layer coating for C/C composites under plasma flame

Preparation, Ablation Behavior and Mechanism of C/C-ZrC-SiC and C/C-SiC Composites

Microstructure and Ablation Performance of SiC–ZrC Coated C/C Composites Prepared by Reactive Melt Infiltration

Effects of Oxidizing Species on Ablation Behavior of C/C-Zrb2-Zrc-Sic Composites Prepared by Precursor Infiltration and Pyrolysis

Comparative Insights into C/C–ZrC–SiC Composites with Different Substrate Carbon on Microstructures, Mechanical Properties, and Ablation Behaviors

Ablation Behavior of a C/C-ZrC-SiC Composite Based on High-Solid-loading Slurry Impregnation under Oxyacetylene Torch

Ablation Resistance and Mechanism of SiC/ZrC-ZrB2double Layer Coating for C/C Composites under Plasma Flame

Mechanical Properties and Ablation Behavior of C/C-ZrC and C/C-ZrC-SiC Composites Prepared by Precursor Infiltration and Pyrolysis Combined with Chemical Vapor Infiltration

Ablation Properties of C/C-Zrc-Sic Composites by the Precursor Infiltration Pyrolysis

Ablation mechanism of C/C–SiC and C/C–SiC–ZrC composites in hypersonic oxygen-enriched environment

Ablation Resistance of Different Coating Structures for C/ZrB2–SiC Composites under Oxyacetylene Torch Flame