Abstract:Atmospheric plasma spraying (APS) was employed to deposit yttria-stabilized zirconia (YSZ) electrolyte for cermet supported tubular solid oxide fuel cells (SOFCs) to reduce manufacturing cost. A post-spray densification process was conducted for the APS-sprayed YSZ coating in order to achieve a required coating density for gas tightness and improved electrical conductivity. The deposition of the YSZ layer was carried out at ambient atmosphere using commercial ZrO2–8 wt.% Y2O3 powder. The densification of the YSZ coating was attained through impregnating yttrium and zirconium nitrate solutions into the porous coating, followed by thermal decomposition of nitrates within the pores of the coating through annealing treatment. The effects of impregnation number on gas permeability and electrical conductivity of the YSZ electrolyte have been examined. It was found that the gas permeability of the YSZ electrolyte layer after the densification treatment reaches a level of 2×10−7 cm4 gf−1 s−1, which is a necessary value for practical operation of SOFCs. The test cell yielded an open circuit voltage of 1.0 V at 930 °C. Furthermore, the anisotropy of the electrical conductivity of the YSZ coating is clearly elucidated by comparing the present result to the reported data. The electrical conductivity of the as-sprayed YSZ coating showed a value of 0.53 S m−1 from the through-thickness direction at 900 °C. The post-densification treatment using nitrate solution improved the electrical conductivity of the YSZ layer by ∼30%.

Joining 3YSZ Electrolyte to AISI 441 Interconnect Using the Ag Particle Interlayer: Enhanced Mechanical and Aging Properties

Joining YSZ Electrolyte to AISI 441 Interconnect for Solid Oxide Cells Using the Ag Interlayer: Enhanced Mechanical and Aging Properties

Silver Particle Interlayer with High Dislocation Density for Improving the Joining of BaZr0.1Ce0.7Y0.1Yb0.1O3-δ Electrolyte and AISI 441 Interconnect

Joining The Bazr0.1ce0.7y0.1yb0.1o3-Delta Electrolyte To Aisi 441 Interconnect For Protonic Ceramic Fuel Cell Applications: Interfacial Microstructure And Long-Term Stability

Reactive Air Brazing of the YSZ/AISI 310s Couples Using a Novel Ag–Nb2O5 Sealant

High Dislocation-Density Silver Particle Interlayer for High-Quality YSZ and Al2O3 Joints

Electrochemically enhanced wetting of 3YSZ and Mn1.5Co1.5O4 by Ag−CuO and their application in flash joining

Joining of Co coated ferritic stainless steel to ceramic solid oxide cells by a novel Ag-SiO<sub>2</sub> braze

Electrochemically driven rapid wetting of 3YSZ by 60Cu–40Ag and its robust joining to 304 stainless steel

Enhancing the Long-Term Stability of Ag Based Seals for Solid Oxide Fuel/electrolysis Applications by Simple Interconnect Aluminization

Joining of Solid Oxide Fuel/electrolysis Cells at Low Temperature: A Novel Method to Obtain High Strength Seals Already at 300 °C

Reactive air brazing of YSZ ceramic with novel Al2O3 nanoparticles reinforced Ag-CuO-Al2O3 composite filler: Microstructure and joint properties

Flash joining of 3YSZ and 430 SS using Ag–CuO filler

Y2W3O12@SiO2 Composite Particles for Regulating Thermal Expansion and Interfacial Reactions in BaZr0.1Ce0.7Y0.1Yb0.1O3-δ/AISI 441 Joints

Joining of Yttria Stabilised Zirconia to Ti6Al4V Alloy Using Novel CuO Nanostructure Reinforced Cu Foam Interlayer

Ag–SiO2 - an Optimized Braze for Robust Joining of Commercial Coated Stainless Steel to Ceramic Solid Oxide Cells

Brazing YSZ ceramics by a novel SiO2 nanoparticles modified Ag filler

Microstructure Evolution and Mechanical Properties of Co Coated AISI 441 Ferritic Stainless Steel/ysz Reactive Air Brazed Joint

A Novel Ag–CuAlO2 Sealant for Reactive Air Brazing of 3YSZ and AISI 310S

Reactive Air Brazing of Ysz-Electrolyte and Al2o3-Substrate for Gas Sensor Sealing: Interfacial Microstructure and Mechanical Properties

Effect of densification processes on the properties of plasma-sprayed YSZ electrolyte coatings for solid oxide fuel cells