Abstract:Proton conducting oxides are attracting increasing attention due to their promising application as electrolytes in solid-state electrochemical devices for energy conversion and chemical production, including protonic ceramic fuel cells, electrolyzers and membrane reactors. BaZrO 3 and Ba(Zr,Ce)O 3 substituted by acceptor dopants are currently the most promising proton conductors. In principle, replacing Zr or Ce with one kind of trivalent element ( e.g. , Y or Yb) can generate oxygen vacancies, which are necessary for the hydration reaction to introduce charge carriers of protons. However, it is commonly recognized that substituting Zr or Ce with Y and Yb simultaneously leads to high performance of the devices, but the reason is not clear. In this work, we studied the transport properties of four different compositional classes: BaZr 0.8− x Ce x Y 0.2 O 3− δ (BZCY20), BaZr 0.8 Y 0.2− x Yb x O 3− δ (BZYYb), BaZr 0.1 Ce 0.7 Y 0.2− x Yb x O 3− δ (BZCYYb) and BaCe 0.8 Y 0.2− x Yb x O 3− δ (BCYYb), at 600, 650 and 700 °C. For BZCY20, the ionic conductivity decreases on replacing Zr in BZY20 with x = 0.1 of Ce, increases with increasing Ce content within x = 0.1–0.5, and decreases on further increasing Ce content from x = 0.5 to 0.8. The ionic transport number increases with increasing Ce content. The ionic conductivity, partial conductivity of oxide ions and hole conductivity of BZCYYb and BCYYb increase with increasing Yb content. Since the increment of hole conductivity is larger, the ionic transport number decreases. For BZYYb, the ionic conductivity decreases and the hole conductivity increases with increasing Yb content, leading to decreasing ionic transport number. Both the high ionic conductivity and transport number are vital factors governing the performance of protonic ceramic cells (PCCs). Therefore, the improved performance of PCCs by adding both Y and Yb into the electrolyte cannot be explained from the viewpoint of electrical properties of the electrolytes. Thereby, we summarized our recent series of studies on the chemical compatibility between the electrolyte and NiO negatrode substrate, and suggested that the loss of dopant was suppressed by partly replacing Y with Yb. The high ionic conduction of the electrolyte can be maintained after co-sintering at high temperature to fabricate PCCs. This might be the real reason for the high performance of the devices using Y and Yb co-substituted electrolytes, prepared by the co-sintering method.

Y2W3O12@SiO2 Composite Particles for Regulating Thermal Expansion and Interfacial Reactions in BaZr0.1Ce0.7Y0.1Yb0.1O3-δ/AISI 441 Joints

A stable and easily sintering BaCeO3-based proton-conductive electrolyte

Silver Particle Interlayer with High Dislocation Density for Improving the Joining of BaZr0.1Ce0.7Y0.1Yb0.1O3-δ Electrolyte and AISI 441 Interconnect

Ionic Conductivity, Sintering and Thermal Expansion Behaviors of Mixed Ion Conductor BaZr0.1Ce0.7Y0.1Yb0.1O3−δ Prepared by Ethylene Diamine Tetraacetic Acid Assisted Glycine Nitrate Process

Joining 3YSZ Electrolyte to AISI 441 Interconnect Using the Ag Particle Interlayer: Enhanced Mechanical and Aging Properties

Negative Thermal Expansion Y2Mo3O12 Particles Reinforced AgCuTi Composite Filler for Brazing Cf/SiC and GH3536

Joining The Bazr0.1ce0.7y0.1yb0.1o3-Delta Electrolyte To Aisi 441 Interconnect For Protonic Ceramic Fuel Cell Applications: Interfacial Microstructure And Long-Term Stability

A Novel Ag Based Sealant for Solid Oxide Cells with a Fully Tunable Thermal Expansion

Basic properties of low thermal expansion coefficient (Y0.5Ca0.5)1−xInxBaCo3ZnO7+δ (x=0, 0.1, 0.2, 0.3) solid solutions for solid oxide fuel cell cathode materials

Reactive Air Brazing of the YSZ/AISI 310s Couples Using a Novel Ag–Nb2O5 Sealant

High Dislocation-Density Silver Particle Interlayer for High-Quality YSZ and Al2O3 Joints

Effects of the Mn-Co spinel coating on BaZr0.1Ce0.7Y0.1Yb0.1O3-/AISI 441 reactive air brazed joint: Microstructure, strength, and stability

Thermal-expansion offset for high-performance fuel cell cathodes

A Novel Non-Crystallizing Na2O-K2O-TiO2 Silicate Glass Sealant for Protonic Ceramic Fuel Cell Applications

Sr-Yb Co-doping of BaCe0.4Zr0.6O3 Proton-Conducting Electrolyte for Solid Oxide Fuel Cells

Stable, Easily Sintered Ca–Zn-doped YCrO3 As Novel Interconnect Materials for Co-Fired Yttrium-Stabilized Zirconia-Based Solid Oxide Fuel Cells

Transport properties of the Ba(Zr,Ce,Y,Yb)O3−δ proton conductor: the real role of co-substitution of Y and Yb

Joining YSZ Electrolyte to AISI 441 Interconnect for Solid Oxide Cells Using the Ag Interlayer: Enhanced Mechanical and Aging Properties

Preparation of Bi2O3-YSZ and YSB-YSZ Composite Powders by a Microemulsion Method and Their Performance as Electrolytes in a Solid Oxide Fuel Cell

Controlled Synthesis of Bi2O3-YSZ Composite Powders and Their Sintering Behavior for High-Performance Electrolytes

Enhancing the Sinterability and Electrical Properties of BaZr0.1Ce0.7Y0.2O3‐δ Proton‐conducting Ceramic Electrolyte