Abstract:Yttrium stabilized zirconia (YSZ) used as the state-of-the-art electrolyte for solid oxide fuel cells (SOFCs) requires high temperature (over 800 °C) to realize sufficient oxygen ion conductivity. Thus, the high operational temperature is the main restriction for the commercial process of YSZ-based SOFCs. To obtain decent ionic conductivity at intermediate-low temperatures, Sr-free cathode LaNiO3 is introduced into YSZ to construct a novel LaNiO3-YSZ composite electrolyte, which is sandwiched by two Ni0.8Co0.15Al0.05LiO2-δ (NCAL) electrodes to assemble systematical fuel cells. This device presents an excellent peak output of 1045 mW cm-2 at 600 °C and even 399 mW cm-2 at 450 °C. A series of characterizations indicates that the oxygen ion conductivity of the LaNiO3-YSZ composite is significantly promoted in comparison with that of pure YSZ, and the LaNiO3 component has certain proton conductivity after hydrogenation. Both of the two factors contributes to the superior performance of such devices at intermediate-low temperatures. Furthermore, the sharp decrease in electronic conductivity for LaNiO3 in hydrogen atmosphere combined with Schottky junction at the anode-electrolyte interface eliminates the short-circuiting problem. Our work demonstrates that incorporating Sr-free cathode LaNiO3 into the YSZ electrolyte is an efficient strategy to boost the performance and reduce the operational temperature of YSZ-based SOFCs.

Joining of Solid Oxide Fuel/electrolysis Cells at Low Temperature: A Novel Method to Obtain High Strength Seals Already at 300 °C

Fabrication of 3D Ni Nanosheet Array on Crofer22APU Interconnect and NiO-YSZ Anode Support to Sinter with Small-Size Ag Nanoparticles for Low-Temperature Sealing SOFCs

A Low-Temperature Sealing Method for Metal-Supported Oxide Fuel Cell Applications: Ni–Sn Transient Liquid Phase Bonding

Enhancing the Long-Term Stability of Ag Based Seals for Solid Oxide Fuel/electrolysis Applications by Simple Interconnect Aluminization

Joining 3YSZ Electrolyte to AISI 441 Interconnect Using the Ag Particle Interlayer: Enhanced Mechanical and Aging Properties

Joining YSZ Electrolyte to AISI 441 Interconnect for Solid Oxide Cells Using the Ag Interlayer: Enhanced Mechanical and Aging Properties

A Novel Ag Based Sealant for Solid Oxide Cells with a Fully Tunable Thermal Expansion

Silver Particle Interlayer with High Dislocation Density for Improving the Joining of BaZr0.1Ce0.7Y0.1Yb0.1O3-δ Electrolyte and AISI 441 Interconnect

Joining of Co coated ferritic stainless steel to ceramic solid oxide cells by a novel Ag-SiO<sub>2</sub> braze

Reactive Air Brazing of the YSZ/AISI 310s Couples Using a Novel Ag–Nb2O5 Sealant

Investigation on Silver Electric Adhesive Doped with Al2o3 Ceramic Particles for Sealing Planar Solid Oxide Fuel Cell

Effective Ag–CuO Sealant for Planar Solid Oxide Fuel Cells

Ag–SiO2 - an Optimized Braze for Robust Joining of Commercial Coated Stainless Steel to Ceramic Solid Oxide Cells

Joining The Bazr0.1ce0.7y0.1yb0.1o3-Delta Electrolyte To Aisi 441 Interconnect For Protonic Ceramic Fuel Cell Applications: Interfacial Microstructure And Long-Term Stability

Efficient strategy to boost the electrochemical performance of yttrium stabilized zirconia electrolyte solid oxide fuel cell for low-temperature applications

An Efficient Method to Engage Oxide Ceramics in Low-Temperature Interfacial Reactions:Microstructure Evolution and Kinetics Behaviors Based on Supercooling in a Transient Liquid Phase Bonding Joint

Tailoring the solid oxide fuel cell anode support composition and microstructure for low‐temperature applications

Metal Supported Solid Oxide Fuel Cells with Infiltrated Nanoelectrodes

Fabrication and Interfacial Structure of Ni-YSZ-LSM Porous Scaffold for Solid Oxide Fuel Cells

Development of Al2o3/Glass-Based Multi-Layer Composite Seals for Planar Intermediate-Temperature Solid Oxide Fuel Cells

Electrochemically enhanced wetting of 3YSZ and Mn1.5Co1.5O4 by Ag−CuO and their application in flash joining