Effective Ag–CuO Sealant for Planar Solid Oxide Fuel Cells

Shiru Le,Zhemin Shen,Xiaodong Zhu,XiaoLiang Zhou,Yan,Kening Sun,Naiqing Zhang,YiXing Yuan,Yachun Mao

DOI: https://doi.org/10.1016/j.jallcom.2010.01.131

IF: 6.2

2010-01-01

Journal of Alloys and Compounds

Abstract:Effective sealant for planar solid oxide fuel cell is one technical hurdle for its application. In this article, Ag–CuO braze, which conducted directly at 950°C in air, has been investigated as a sealant candidate between the SS430 interconnect and the Ni/YSZ anode for the planar solid oxide fuel cells. The results for leakage rates indicate that the lowest leakage is as low as 0.001sccmcm−1. SEM images demonstrates that both the pure Ag and 6mol% CuO in the braze integrates the anode inherently. However pure Ag wets poorly on the SS430 interconnect surface but 6mol% CuO braze forms a reaction zone, upon which Ag wets well, so the hermeticity has been improved significantly. Even after experiencing 20 thermal cycles, the leakage rate is still as low as 0.002sccmcm−1. No significant effects of thermal cycles on the interfacial microstructure of the sealant were observed. These shows that Ag–CuO braze is a promising candidate for SOFC sealant.