Abstract:Space double-layer cylindrical reticulated shells (SDLCRS) have undergone rapid development in the four three decades. Significantly different from conventional multistory high-rise structures, such structures are very sensitive to vertical actions. As a result, conventional seismic isolation techniques that aim to reduce horizontal seismic actions are notably insufficient for this kind of structure. In this study, a new three-dimensional seismic isolation bearing was developed that can simultaneously reduce the horizontal and vertical seismic responses of an SDLCRS. To examine the actual seismic isolation effectiveness of the three-dimensional seismic isolation bearing and provide important theoretical, technical and experimental support for practical engineering applications, comparative shaking table tests were performed on isolated and non-isolated SDLCRSs with lower supporting structures. The 2013 Lsf ground motion record during Lushan earthquake and the 1954 Taft ground motion record were selected as seismic inputs. The dynamic responses including acceleration, displacement and strain of the SDLCRS under the input ground motions with different amplitudes were obtained using the shaking table tests. In addition, the seismic damage of the isolated and non-isolated structures was examined to determine the acceleration amplification effect of the structures. The effectiveness in acceleration and strain responses demonstrated that the three-dimensional seismic isolation bearing was very useful for horizontal and vertical seismic isolation. Moreover, the maximum displacement responses of the bearing were less than half of the respective design displacements, suggesting that the bearing still had considerable reserve bearing capacity and could significantly improve the safety of an SDLCRS under seismic loads. The bearing developed in this study not only has excellent seismic isolation performance and post earthquake restoration capability but can also be easily installed and maintained. Thus, this bearing holds great promise for engineering applications and is suitable for SDLCRS that require both horizontal and vertical seismic isolation.

Study on Mechanical Model and Shaking Table Test of Spherical Tank Rolling Isolation

Parametric dynamic stability analysis and vibration isolation effect assessment of base-isolated liquid storage tanks

Experiment on Active Vibration Isolation of a Conical Shell Isolator

Dynamic Experimental Investigation On The Self-Vibration Characteristics Of Liquid Storage Tanks Under Seismic Excitations

Seismic analysis of a large base-isolated liquid storage tank with fixed roof based on added mass method

Shaking Table Study of the Three-Dimensional Isolation of a Cylindrical Reticulated Shell

Seismic evaluation of isolation performance on single layer cylindrical reticulated shells supported along four sides

Shaking Table Tests and Analysis of Offshore Jacket Platform Structures Model with SMA Damping Isolation Systems

Analysis On Vertical Tank Fluid-Solid Coupling Vibration And Base Isolation Dynamic Response

Experimental Study on Shaking Table of Model Building with Rollers and Lead Rubber Bearing

Dynamic Modeling and Experiment Analysis of a Rolling Isolation Platform

Shaking table test of a novel Three-dimensional seismic isolation system with inclined rubber bearings

Evaluation and Performance Testing of Eccentric Rolling Isolation System

Full‐scale shaking table test and numerical modeling of a 3000‐liter legged storage tank isolated with a vertical rocking isolation system

Shaking table test of space double-layer cylindrical reticulated shell with three-dimensional isolation bearing

Shaking table test of a steel frame structure with layered three‐dimensional isolation

Experimental Parametric Study and Phenomenological Modeling of a Deformable Rolling Seismic Isolator

Evaluation of isolation performance of, reticulated shell structures with curvature-consistent frictional pendulum isolation system through shaking table tests

Vibration control of steel jacket offshore platform structures with damping isolation systems

Comparative study on high-rise isolated structure founded on various soil foundations by using shaking table tests

Shaking table test of damping ratio of strengthening-adding-story isolation structures