Abstract:A high damping rubber bearing (HDRB) is widely utilized in base-isolation structures due to its good energy dissipation capacity and environmentally friendly properties; however, it is incapable of isolating the vertical vibration caused by earthquakes and subways effectively. Thick rubber bearings with a low shape factor have become one of the important vertical isolation forms. This paper provides an experimental comparative study on high damping rubber bearings with low shape factor (HDRB-LSF), thick lead–rubber bearings (TLRB), and lead–rubber bearings (LRB). The abilities of the bearing and energy dissipation of the above bearings are analyzed contrastively considering the influence of vertical pressure, loading frequency, shear strain, and pre-pressure. Firstly, the HDRB-LSF, TLRB, and LRB are designed according to the Chinese Code for seismic design of buildings. Secondly, cyclic vertical compression tests and horizontal shear tests, as well as their correlation tests, are conducted, respectively. The vibrational characteristics and hysteresis feature of these three bearings are critically compared. Thirdly, a corrected calculation of vertical stiffness for the thick rubber bearings is proposed based on the experimental data to provide a more accurate and realistic tool measuring the vertical mechanical properties of rubber bearings. The test results proved that the HDRB-LSF has the most advanced performance of the three bearings. For the fatigue property, the hysteresis curves of the HDRB-LSF along with TLRB are plump both horizontally and vertically, thus providing a good energy dissipation effect. Regarding vertical stiffness, results from different loading cases show that the designed HDRB-LSF possesses a better vertical isolation effect and preferable environmental protection than LRB, a larger bearing capacity, and, similarly, a more environmentally friendly property than TLRB. Hence, it can avoid the unfavorable resonance effect caused by vertical periodic coupling within the structure. All the experimental data find that the proposed corrected equation can calculate the vertical stiffness of bearings with a higher accuracy. This paper presents the results of an analytical, parametric study that aimed to further explore the low shape factor concepts of rubber bearings applied in three-dimensional isolation for building structures.

Experimental Study on Shaking Table of Model Building with Rollers and Lead Rubber Bearing

Study on Building Moving and Isolation

Shaking table test of a novel Three-dimensional seismic isolation system with inclined rubber bearings

Full-Scale Tests and Analytical Model of the Teflon-Based Lead Rubber Isolation Bearings

Shaking table tests and numerical study of a sliding isolation bearing for the seismic protection of museum artifacts

Experimental Investigation on the Effectiveness of Laminated Rubber Bearings to Isolate Metro Generated Vibration

An Experimental Study on the Mechanical Properties of a High Damping Rubber Bearing with Low Shape Factor

Application Study on Elastic Sliding Bearings in Isolated High-rise Building

Shaking Table Test for Seismic Isolation Performance of Adjustable Height Seismic Isolation Rubber Bearing

Study on Mechanical Model and Shaking Table Test of Spherical Tank Rolling Isolation

Parameter optimization of isolator in structure with added floors and related shaking table tests

Seismic responses of multi-story building isolated by Lead-Rubber Bearings considering effects of the vertical stiffness and buckling behaviors

Shaking Table Tests on Earthquake Response Characterization of a Complex Museum Isolated Structure in High Intensity Area

Study and Development on Shake Table Tests of Scaled Models of Bridge Engineering

A study of the concrete continuous girder bridge shaking table test considering the sliding of laminated rubber bearings

Mitigating Train-Induced Building Vibrations with Rubber Bearings Designed for Horizontal Earthquake Isolation

Shaking Table Model Test of Jinan Olympic Stadium

Shaking table test of isolated continuous girder bridge model under different earthquake intensity excitation

Seismic Performance of Building with Novel Steel Roller Isolation Bearing: Experimental and Numerical Studies

Assessing the significance of nonlinear rotational behavior in high damping rubber bearings for seismic performance of base‐isolated RC frame building

Shaking table experiment of a recycled concrete block masonry building structure with a ‘self-contained’ structural system