Abstract:A high damping rubber bearing (HDRB) is widely utilized in base-isolation structures due to its good energy dissipation capacity and environmentally friendly properties; however, it is incapable of isolating the vertical vibration caused by earthquakes and subways effectively. Thick rubber bearings with a low shape factor have become one of the important vertical isolation forms. This paper provides an experimental comparative study on high damping rubber bearings with low shape factor (HDRB-LSF), thick lead–rubber bearings (TLRB), and lead–rubber bearings (LRB). The abilities of the bearing and energy dissipation of the above bearings are analyzed contrastively considering the influence of vertical pressure, loading frequency, shear strain, and pre-pressure. Firstly, the HDRB-LSF, TLRB, and LRB are designed according to the Chinese Code for seismic design of buildings. Secondly, cyclic vertical compression tests and horizontal shear tests, as well as their correlation tests, are conducted, respectively. The vibrational characteristics and hysteresis feature of these three bearings are critically compared. Thirdly, a corrected calculation of vertical stiffness for the thick rubber bearings is proposed based on the experimental data to provide a more accurate and realistic tool measuring the vertical mechanical properties of rubber bearings. The test results proved that the HDRB-LSF has the most advanced performance of the three bearings. For the fatigue property, the hysteresis curves of the HDRB-LSF along with TLRB are plump both horizontally and vertically, thus providing a good energy dissipation effect. Regarding vertical stiffness, results from different loading cases show that the designed HDRB-LSF possesses a better vertical isolation effect and preferable environmental protection than LRB, a larger bearing capacity, and, similarly, a more environmentally friendly property than TLRB. Hence, it can avoid the unfavorable resonance effect caused by vertical periodic coupling within the structure. All the experimental data find that the proposed corrected equation can calculate the vertical stiffness of bearings with a higher accuracy. This paper presents the results of an analytical, parametric study that aimed to further explore the low shape factor concepts of rubber bearings applied in three-dimensional isolation for building structures.

Shaking table test of a novel Three-dimensional seismic isolation system with inclined rubber bearings

Shaking table test of a steel frame structure with layered three‐dimensional isolation

Shaking table test of space double-layer cylindrical reticulated shell with three-dimensional isolation bearing

Shaking Table Study of the Three-Dimensional Isolation of a Cylindrical Reticulated Shell

Development of an innovative three-dimensional vibration isolation bearing

Experimental Study on Shaking Table of Model Building with Rollers and Lead Rubber Bearing

Shaking Table Test for Seismic Isolation Performance of Adjustable Height Seismic Isolation Rubber Bearing

In situ tests of building structures isolated by innovative three‐dimensional vibration isolation bearings

Shaking Table Tests on the Multi-Dimensional Seismic Response of Long-Span Grid Structure with Base-Isolation

Parameter optimization of isolator in structure with added floors and related shaking table tests

Development of a three-directional vibration isolator for buildings subject to metro- and earthquake-induced vibrations

Shaking table and pseudodynamic tests for the evaluation of the seismic performance of base-isolated structures

Seismic protection of a single-layer spherical lattice shell structure using a separated three-dimensional isolation system

Seismic evaluation of isolation performance on single layer cylindrical reticulated shells supported along four sides

An Experimental Study on the Mechanical Properties of a High Damping Rubber Bearing with Low Shape Factor

Shaking table tests on the seismic response of truss structure with air spring‐FPS three‐dimensional isolation bearing

Performance of Seismically Isolated Pile-supported Structures through 1 g Shaking Table Tests

Horizontal Shaking Table Tests on a Four-Story Prototype Structure Using Multi-Dimensional Earthquake Isolation and Mitigation Devices

Comparative study on high-rise isolated structure founded on various soil foundations by using shaking table tests

One-way shaking table test study of resilient steel frame with seismic isolated floor system

Full-Scale Tests and Analytical Model of the Teflon-Based Lead Rubber Isolation Bearings