Abstract:A high damping rubber bearing (HDRB) is widely utilized in base-isolation structures due to its good energy dissipation capacity and environmentally friendly properties; however, it is incapable of isolating the vertical vibration caused by earthquakes and subways effectively. Thick rubber bearings with a low shape factor have become one of the important vertical isolation forms. This paper provides an experimental comparative study on high damping rubber bearings with low shape factor (HDRB-LSF), thick lead–rubber bearings (TLRB), and lead–rubber bearings (LRB). The abilities of the bearing and energy dissipation of the above bearings are analyzed contrastively considering the influence of vertical pressure, loading frequency, shear strain, and pre-pressure. Firstly, the HDRB-LSF, TLRB, and LRB are designed according to the Chinese Code for seismic design of buildings. Secondly, cyclic vertical compression tests and horizontal shear tests, as well as their correlation tests, are conducted, respectively. The vibrational characteristics and hysteresis feature of these three bearings are critically compared. Thirdly, a corrected calculation of vertical stiffness for the thick rubber bearings is proposed based on the experimental data to provide a more accurate and realistic tool measuring the vertical mechanical properties of rubber bearings. The test results proved that the HDRB-LSF has the most advanced performance of the three bearings. For the fatigue property, the hysteresis curves of the HDRB-LSF along with TLRB are plump both horizontally and vertically, thus providing a good energy dissipation effect. Regarding vertical stiffness, results from different loading cases show that the designed HDRB-LSF possesses a better vertical isolation effect and preferable environmental protection than LRB, a larger bearing capacity, and, similarly, a more environmentally friendly property than TLRB. Hence, it can avoid the unfavorable resonance effect caused by vertical periodic coupling within the structure. All the experimental data find that the proposed corrected equation can calculate the vertical stiffness of bearings with a higher accuracy. This paper presents the results of an analytical, parametric study that aimed to further explore the low shape factor concepts of rubber bearings applied in three-dimensional isolation for building structures.

Shaking Table Test for Seismic Isolation Performance of Adjustable Height Seismic Isolation Rubber Bearing

A study of the concrete continuous girder bridge shaking table test considering the sliding of laminated rubber bearings

Shaking table test of isolated continuous girder bridge model under different earthquake intensity excitation

Shaking table test of a novel Three-dimensional seismic isolation system with inclined rubber bearings

Earthquake response of bridges bearing on flexible rubber considering pounding of girders

Seismic Response of Isolated Bridges with LRB under Muldi-Directional Earthquake-Part (Ⅰ) Shaking Table Test of Bridge Model

Experimental Study of Seismic Performance of Seismically Mitigated and Isolated Bridges Under Strong Earthquake

Behavior of high damping seismic isolation rubber bearings for bridges

Comparing Rubber Bearings and Eradi-Quake System for Seismic Isolation of Bridges

Seismic Vulnerability Analysis of Concrete-Filled Steel Tube Tied Arch Bridges Using Symmetrically Arranged High-Damping Rubber Bearings

Shaking table test of a steel frame structure with layered three‐dimensional isolation

Mechanical Behavior of Laminated Rubber Isolation Bearing with Buckling Steel Plate

Experimental Study on Shaking Table of Model Building with Rollers and Lead Rubber Bearing

An Experimental Study on the Mechanical Properties of a High Damping Rubber Bearing with Low Shape Factor

Experimental study of a scaled bridge model with a unidirectional rocking isolation bearing system (Uni‐RIBS) through shaking table tests

Shaking table experimental study and theoretical analysis of the longitudinal seismic-reduced behavior of continuous-beam bridges

Mechanical Properties and Seismic Loss Assessment of Improved Isolation Bearing with Variable Stiffness

Full-Scale Tests and Analytical Model of the Teflon-Based Lead Rubber Isolation Bearings

Shaking table test of space double-layer cylindrical reticulated shell with three-dimensional isolation bearing

Experimental Study on Vibration Characteristics of Unit-Plate Ballastless Track Systems Laid on Long-Span Bridges Using Full-Scale Test Rigs

Study on the damping efficiency of continuous beam bridge with constant cross-section applied by lead rubber bearings and fluid viscous dampers