Abstract:An innovative seismic performance evaluation strategy for irregular rigid frame bridges with a long-span and high-rise piers under the action of ground motions with different fault distances is presented in this paper. A total of 129 mainshock records taken during the Wenchuan earthquake, from national seismic stations with different fault distances, were analyzed using statistical methods, to determine the attenuation characteristics of the intensity index of the Wenchuan earthquake records from the perspective of aseismic engineering, and the attenuation of the acceleration response spectrum is discussed. The Miaoziping Bridge on the Dujiangyan–Wenchuan Expressway, which was damaged in the Wenchuan earthquake, is taken as the analysis background; two sets of samples for long-span continuous rigid frame bridges with different pier heights are constructed, to discuss the seismic response characteristics of continuous long-span rigid frame bridges; and representative values for the natural periods of these two bridge structural groups are subsequently compared and analyzed. After the peak responses for various bridges with various pier heights are determined through a response spectrum analysis under the action of ground motions with different fault distances, and the surfaces for the obtained peak responses are fitted and the response characteristics for different fault distances are discussed. It is shown in the results that the seismic response characteristics of the continuous rigid frame bridges with long-span and high-rise piers were significantly different under the action of the ground motions with different fault distances, and the seismic responses of these two bridge groups were distinctly larger under the action of near-fault ground motions. Furthermore, based on the above research, suggestions for the pier arrangement and bridge site selection for continuous rigid frame bridges with long-span and high-rise piers are also discussed. The results of this paper also provide some theoretical guidance for the sustainable development of bridges with long-span and high-rise piers, from the perspective of bridge seismic response characteristics.

Seismic Response of Isolated Bridges with LRB under Muldi-Directional Earthquake-Part (Ⅰ) Shaking Table Test of Bridge Model

SEISMIC RESPONSE OF ISOLATED BRIDGES WITH LRB UNDER MULDI-DIRECTIONAL EARTHQUAKE——PART (Ⅱ) THEORETICAL AND COMPARATIVE ANALYSIS

Shaking table test of isolated continuous girder bridge model under different earthquake intensity excitation

Seismic Response of A Multi-Span Bridge Based on Remote Testing Platform Netslab

Earthquake response of bridges bearing on flexible rubber considering pounding of girders

Experimental Study of Seismic Performance of Seismically Mitigated and Isolated Bridges Under Strong Earthquake

A study of the concrete continuous girder bridge shaking table test considering the sliding of laminated rubber bearings

Shaking table experimental study and theoretical analysis of the longitudinal seismic-reduced behavior of continuous-beam bridges

Shaking Table Model Test of Long-span Continuous Girder Bridge with Longitudinal Seismic Energy Dissipating

Seismic Analysis of Long Span Continuous Rigid-Frame Bridge with Thin-Walled High Piers

Real‐time hybrid simulation for investigating the seismic response of a bridge isolated with lead rubber bearings

Shaking Table Test for Seismic Isolation Performance of Adjustable Height Seismic Isolation Rubber Bearing

Stochastic Seismic Response Analysis of Long-span Continuous Rigid Frame Bridge

The Seismic Response Of Long Span Continuous Rigid Frame Box Girder Bridges Subjected To Spatially Varying Ground Motions

Study on the damping efficiency of continuous beam bridge with constant cross-section applied by lead rubber bearings and fluid viscous dampers

Research on earthquake-reduction design method of continuous girder bridges in a high-intensity earthquake area

Nonlinear Analysis Method for Seismic Responses Considering Pounding Between Girders of Curved Bridge with LRBs

Seismic performance assessment and design procedure of base-isolated bridges with lead-rubber-bearing and negative stiffness springs (LRB-NS)

Seismic Isolation Design for Long-span Prestressed Concrete Continuous Girder Bridge

Response Characteristics of Irregular Continuous Rigid Frame Bridges with Long-Span and High-Rise Piers under Ground Motion Excitations with Different Fault Distances

Seismic Responses and Damage Control of Long-Span Continuous Rigid-Frame Bridges Considering the Longitudinal Pounding Effect under Strong Ground Motions