Abstract:Under extreme earthquakes, a continuous bridge tends to fail because of the damage to the bearing or the pier. A strong connection between the girder and the pier decreases the bearing displacement, but the increased inertia force of the girder to the base of the pier leads to pier damage. Conversely, a weak connection while protecting the pier causes bearing damage. In many cases, the bridge loses its function due to the damages concentrated on local members, while the rest of the members remain undamaged. To simultaneously protect both the bearing and pier during earthquakes with an evenly distributed damage pattern, a new real-time semi-active control algorithm based on the damage of bridge members (RTSD) using magneto-rheological (MR) dampers is proposed. Two displacement indices are established to represent the damage status of the bearing and pier and are used as control signals for the MR damper forces. A typical three-span continuous reinforced concrete bridge modeled by nonlinear fiber damage elements is used for the demonstration of the proposed method. Passive controls using viscous dampers (PVD) and MR dampers with a constant current (PMR) are also adopted for comparisons. Numerical simulation results show that the proposed method is more effective in protecting the bearing and pier than the passive controls. With the RTSD control, the damages to the bearing and pier are balanced and the limited damages to each pier can be evenly developed within the allowable range. Moreover, the initial damper force can be set in a wide range for the RTSD control to protect both the bearing and pier under various earthquakes. In contrast, it is impossible to select a proper damper force by passive controls. The RTSD control can also control the pier damage within different prescribed targets under extreme earthquakes.

Research on earthquake-reduction design method of continuous girder bridges in a high-intensity earthquake area

Earthquake Response of Bridge Restrainers Considering Failure of Bearings

A Method for Controlling Seismic Damage of RC Bridge Piers Subjected to Strong Aftershocks

Earthquake response of bridges bearing on flexible rubber considering pounding of girders

Study on the damping efficiency of continuous beam bridge with constant cross-section applied by lead rubber bearings and fluid viscous dampers

Study on Seismic Performance of Long-Span Railway Continuous Girder Bridges in High Seismic Intensity Region.

Design method of energy-dissipating earthquake-reduction along longitudinal direction of self-anchored suspension bridge

Study on design method of energy-dissipating earthquake-reduction along transverse of self-anchored suspension bridge by using lead dampers

SEISMIC DESIGN METHOD OF SMALL AND MEDIUM SPAN BRIDGE CONSIDERING BEARING FRICTION SLIPPING

Shaking Table Model Test of Long-span Continuous Girder Bridge with Longitudinal Seismic Energy Dissipating

Yielding Steel Dampers as Restraining Devices to Control Seismic Sliding of Laminated Rubber Bearings for Highway Bridges: Analytical and Experimental Study

Design Method of Energy-Dissipated Earthquake-Reduction along Transverse of Long-Span Cable-Stayed Bridges

Seismic Isolation Design for Long-span Prestressed Concrete Continuous Girder Bridge

Shaking table experimental study and theoretical analysis of the longitudinal seismic-reduced behavior of continuous-beam bridges

Seismic Analysis of Long Span Continuous Rigid-Frame Bridge with Thin-Walled High Piers

Stochastic Seismic Response Analysis of Long-span Continuous Rigid Frame Bridge

Analysis and Evaluation of Seismic Behavior of Continuous Girder Bridge

Experimental Study of Seismic Performance of Seismically Mitigated and Isolated Bridges Under Strong Earthquake

Research on Longitudinal Collapse Mode and Control of the Continuous Bridge under Strong Seismic Excitations

Seismic damage control of nonlinear continuous reinforced concrete bridges under extreme earthquakes using MR dampers