Abstract:Concrete-filled steel tube (CFST) arch bridges have a high center of gravity and a substantial mass, resulting in a discernible seismic response. Consequently, long-span CFST arch bridges must retain exceptional seismic performance and appropriate seismic control design. In this study, the dynamic response and seismic performance of a unique swallow-type CFST arch bridge when subjected to longitudinal earthquake forces were analyzed using numerical simulation methods. The displacement and axial force response results and their laws of the key bridge components were obtained. Taking into account seismic checking calculations, two damping measures were proposed for the CFST arch bridge, as the relative displacement of the girder end exceeded the allowable value specified. The appropriate design parameters for viscous dampers and lead shear dampers were examined. Additionally, the seismic performance of these dampers was verified through a shaking table test using a 1:16 scale model. The findings indicated that when subjected to Wenchuan Wolong wave action, the relative displacement between the steel box girder and the concrete girder of the bridge was significantly larger, leading to girder end pounding. The limit values were surpassed by 32.5% and 50%, when subjected to the uniform and traveling wave excitations, respectively, thus indicating that the expansion joint was the most vulnerable component. Following the selection of optimal parameters for the dampers, the dampers exhibited the capability to mitigate seismic and pounding impacts. Long-span CFST arch bridges with dampers were found to effectively reduce the seismic response of the skewback strain and vault, as well as the relative displacement of the girder ends. Furthermore, the average maximum damping rates achieved by the viscous damper and the lead shear damper reached 44.9% and 44.6%, respectively.

Study on design method of energy-dissipating earthquake-reduction along transverse of self-anchored suspension bridge by using lead dampers

Design method of energy-dissipating earthquake-reduction along longitudinal direction of self-anchored suspension bridge

Seismic Damage of Long Span Steel Tower Suspension Bridge Considering Strong Aftershocks

Design Method of Energy-Dissipated Earthquake-Reduction along Transverse of Long-Span Cable-Stayed Bridges

A Method for Controlling Seismic Damage of RC Bridge Piers Subjected to Strong Aftershocks

Research on earthquake-reduction design method of continuous girder bridges in a high-intensity earthquake area

A simplified design method for metallic dampers used in the transverse direction of cable-stayed bridges

Study on the damping efficiency of continuous beam bridge with constant cross-section applied by lead rubber bearings and fluid viscous dampers

SEISMIC DESIGN METHOD OF SMALL AND MEDIUM SPAN BRIDGE CONSIDERING BEARING FRICTION SLIPPING

Development of Steel Dampers for Bridges

Development of Steel Dampers for Bridges to Allow Large Displacement Through a Vertical Free Mechanism

Utilizing yielding steel dampers to mitigate transverse seismic irregularity of a multispan continuous bridge with unequal height piers

Optimisation of Longitudinal Seismic Energy Dissipation System for Straddle-type Monorail-Cum-Road Long-Span Cable-Stayed Bridge

Study on seismic response control of a single-tower self-anchored suspension bridge with elastic-plastic steel damper

Shaking table test study on the seismic control of concrete-filled steel tube arch bridges based on dampers

Investigation of the Wind-Resistant Performance of Seismic Viscous Dampers on a Cable-Stayed Bridge

Spatial Analysis of Self-anchored Suspension Bridge and Its Experimental Study

Study on Energy Dissipation of Viscous Damper for Long-Span Suspension Bridges

Study of Dynamic Behavior and Influences Induced by Structural Parameter Variations of Self-Anchored Suspension Bridge

Seismic Response Analysis and Shock Absorption Control of Self-anchored Cable-stayed Suspension Bridge

Probabilistic Seismic Evaluation and Experimental Tests of Multi-Direction Damping System on a Super-Long Column-Pylon Cable-Stayed Bridge