Abstract:In piezoelectric coupled shells, the distributed actuation force usually consists of four components, including the membrane force and bending moment in the longitudinal direction, and the membrane force and bending moment in the circumferential direction. For commonly used bi-axial piezoelectric materials, such as PZT and PVDF, these four components may have phase difference of pi or -pi. This leads to force cancellation and reduces the overall control effectiveness. Supposing that one piezoelectric actuator is uni-axial, for example only d(31) is not equal to zero, and then this actuator will generate actuation force with the first two components or the latter two, depending on the actuator configuration and the shell geometry/modes. Accordingly the force cancellation can be avoided or minimized. In this research, the Macro-Fiber Composite (MFC) actuators are used as uni-axial actuators. The dynamic equation of a conical shell is firstly given. Then the actuation force is derived based on the converse piezoelectric effect and thin shell assumptions. Three types of the MFC actuators are considered, including MF'C-P1, MFC-P2 and MFC-P3. Case studies are performed to evaluate the distributed actuation forces. Both axial and transverse vibrations of the conical shell are formulated to study the force cancellation of various shell modes, and the payload effects are considered in the analysis. The results show that, by using the MFC actuators, actuation force can be enhanced because force cancellation is avoided. The force enhancement becomes even more significant for membrane dominated modes, such as axial modes of shells with heavy payloads.

Experiment on Active Vibration Isolation of a Conical Shell Isolator

Active Vibration Suppression of Payloads with a Conical Isolator

Experiments on Active Precision Isolation with A Smart Conical Adapter

Modeling and Analysis of a High-Static-low-dynamic Stiffness Vibration Isolator with Experimental Investigation

Simulation And Design Of Composite Vibration Isolator For Spacecrafts

Fuzzy Controller For Active Vibration Control Of Cylindrical Shells

Optimal Control of Clamped-Free Conical Shell Using Diagonal Piezoelectric Sensor and Actuator

Distributed Sensing Signals Of Truncated Conical Shells With Clamped-Free Boundary Conditions

Distributed actuation characteristics of clamped-free conical shells using diagonal piezoelectric actuators

Vibration Control of Toroidal Shells with Parallel and Diagonal Piezoelectric Actuators

Optimal vibration control of conical shells with collocated helical sensor/actuator pairs | Optymalne sterowanie drganiami powłok stożkowych za pomoca{ogonek} spiralnego skolokowanego układu czujnika i elementu wykonawczego

Control Force Enhancement Of Conical Shells Using Piezoelectric Macro-Fiber Composite

Control of Conical Shells Laminated With Full and Diagonal Actuators

Theoretical analysis of a multi-layered thin shell coupled with piezoelectric shell actuators for distributed vibration controls

Spatially Filtered Vibration Control of Cylindrical Shells

Spatial Microscopic Actuations of Shallow Conical Shell Sections

DYNAMICS AND DISTRIBUTED CONTROL OF CONICAL SHELLS LAMINATED WITH FULL AND DIAGONAL ACTUATORS

Optimal vibration control of conical shells with collocated helical sensor/actuator pairs

Spatial Electrostrictive Modal Actuation Of Conical Shells

Dynamic Analysis of Flexoelectric Actuated Truncated Conical Shells

Micro-Control Characteristics of Conical Shell Sections