Abstract:Large airborne optical systems require very high beam pointing control accuracy , which will put forward some new challenges for the design of an airborne isolation platform .We analyze the characteristics of aircraft struc-tural vibration , and propose to develop a pneumatic and electromagnetic hybrid driving isolator .The isolator uses an adjustable pneumatic air spring with an external air container to suspend the payload , and a coaxial electromagnetic actuator is integrated with the output rod of the isolator , which provides a broadband active control force for the pay-load.The preliminarily determined carrying capacity is 150~190 kg and the isolation frequency range is from 1 Hz to 100 Hz.This paper firstly describes the principles of pneumatic /electromagnetic hybrid driving and presents a structural layout of the isolator .Then it simplifies the system , establishes the physical model , and derives the dy-namic equations of the isolator .Finally, the Matlab/Simulink numerical simulations of the isolator are conducted to research respectively the feasibility and efficiency of PID control algorithm and LQR control algorithms .The simula-tion results and their analysis show preliminarily that:(1) the two active control algorithms are efficient , and the payload′s vibration displacement amplitude can be reduced to ±10μm level under a wide frequency band ( 1~100 Hz) random vertical disturbance;(2) this vibration reduced performance of the isolator can meet the installation requirements of large airborne optical equipment .The comparison between the PID and LQR control methods shows that the vibration reduced performance of the PID method is slightly better than that of the LQR method for a single isolator system;besides, the PID method is easy to implement .

Active Vibration Suppression of Payloads with a Conical Isolator

Experiment on Active Vibration Isolation of a Conical Shell Isolator

Experiments on Active Precision Isolation with A Smart Conical Adapter

Optimal Control of Clamped-Free Conical Shell Using Diagonal Piezoelectric Sensor and Actuator

Distributed actuation characteristics of clamped-free conical shells using diagonal piezoelectric actuators

Design and Simulation of an Active Vibration Isolator Based on Pneumatic-Electromagnetic Hybrid Driving

Fuzzy Controller For Active Vibration Control Of Cylindrical Shells

Simulation And Design Of Composite Vibration Isolator For Spacecrafts

Vibration Control of Toroidal Shells with Parallel and Diagonal Piezoelectric Actuators

Control Force Enhancement Of Conical Shells Using Piezoelectric Macro-Fiber Composite

Novel Active–Passive Piezoelectric Hybrid Constrained-Layer Damping Technique for Vibration Isolation in a Whole Spacecraft

Hybrid Passive/Active Vibration Control of a Loosely Connected Spacecraft System

Study and Simulation of Active Vibration Isolation System with Piezo Electric Stack Actuators

Modeling and Analysis of Piezoelectric Folded-Beam Isolator for Attenuating Micro-Vibration in Spacecraft

Optimal vibration control of conical shells with collocated helical sensor/actuator pairs

A hybrid vibration isolator based on piezoelectric and viscoelastic materials

Theoretical analysis of a multi-layered thin shell coupled with piezoelectric shell actuators for distributed vibration controls

Design and Experimental Study of a Hybrid Micro-Vibration Isolation System Based on a Strain Sensor for High-Precision Space Payloads

PID composite vibration control and simulation analysis of an active and passive integrated vibration isolator

Active and passive integration of vibration isolator based on piezoelectric-rubber

Active Vibration Isolation and Excitation by Piezoelectric Slab with Constant Feedback Gains