Abstract:Conical shells are widely used as payload/rocket adapters in rocket fairing systems. Generally, the conical shells are clamped at the major end and free at the minor end, where the payload is mounted. This study focuses on the dynamic sensing of conical shells with fix-free boundary conditions (BCs) by using distributed piezoelectric helical sensors. Two types of motion are studied, i.e., the transverse modes and the torsion modes. The shear-type sensors for shells sensing are presented first. Formulations of sensing signals of a general shell of revolution are presented, and then simplified to conical shells. For sensing of transverse vibrations, thin piezoelectric sensors are laminated on the top surface. Two types of sensor distribution are considered: a fully distributed and a helical or diagonal laminated. The total signal consists of four components resulting from the four strain components, and each of them is evaluated in detail. For sensing of torsion vibrations, a meridional polarized shear-type sensor with side electrodes is layered on the top surface of the shell structure. Sensing signals of natural shell modes are also evaluated. Analyses show that, in low order modes, the sensing signals induced by the circumferential membrane strains are the primary components of the total signal generations. The numerical results indicate the optimal location of the sensors. The proposed method is capable of determining the modal participation factors, while the testing signal is available; it is also capable of determining the mode shapes by using several distributed sensor segments.

Optimal vibration control of conical shells with collocated helical sensor/actuator pairs | Optymalne sterowanie drganiami powłok stożkowych za pomoca{ogonek} spiralnego skolokowanego układu czujnika i elementu wykonawczego

Optimal Control of Clamped-Free Conical Shell Using Diagonal Piezoelectric Sensor and Actuator

Optimal vibration control of conical shells with collocated helical sensor/actuator pairs

Optimal placements of actuators in vibration active control for double-layer spherical grid shell structures

Torsional Sensors for Conical Shell in Torsional Vibrations

Multi-parameter optimization of piezoelectric actuators for multi-mode active vibration control of cylindrical shells

Experiment on Active Vibration Isolation of a Conical Shell Isolator

Distributed Sensing Signals Of Truncated Conical Shells With Clamped-Free Boundary Conditions

Vibration Control of Toroidal Shells with Parallel and Diagonal Piezoelectric Actuators

Distributed actuation characteristics of clamped-free conical shells using diagonal piezoelectric actuators

Fuzzy Controller For Active Vibration Control Of Cylindrical Shells

Optimal Control Of Piezoelectric Laminated Parabolic Cylindrical Panels

Spatial Electrostrictive Modal Actuation Of Conical Shells

Microscopic actuation and optimal actuator locations of paraboloidal cylindrical shells

Torsion and Transverse Sensing of Conical Shells

Sensing/Control of Shell Symmetrical Modes Using Diagonal Line Sensors/Actuators

DYNAMICS AND DISTRIBUTED CONTROL OF CONICAL SHELLS LAMINATED WITH FULL AND DIAGONAL ACTUATORS

Spatial Microscopic Actuations of Shallow Conical Shell Sections

Control of Conical Shells Laminated With Full and Diagonal Actuators

Spatially Distributed Orthogonal Piezoelectric Shell Actuators: Theory and Applications

Control of Static Shape, Dynamic Oscillation, and Thermally Induced Vibration of Nozzles