Abstract:Dynamic responses of cylindrical shells coupled with shape-memory alloy (SMA) ring segments placed at critical locations are investigated. Since the SMA actuators are highly nonlinear and governed by the temperate-dependent stiffness and martensite/austenite fraction, input shaping and phase shift of temperature profiles are incorporated to control the shell vibrations. Open-loop equations of an elastic cylindrical shell panel are defined first and then used with assumed mode-shape functions satisfying specified boundary conditions in the free-vibration analysis. Modal-analysis data are used to determine spatial strain distributions of natural modes. Distributed modal-signal characteristics suggest optimal placements of SMA actuator segment(s) for each given mnth mode. Based on the modal-expansion method, the open-loop control force induced by the SMA ring segments applied to a simply supported cylindrical shell panel is formulated. This formulation indicates that only the odd modes in the circumferential direction can be controlled. Longitudinal modes are controlled via placing specific number, depending on the mode, of actuator segments along the panel length. To predict control effects of the nonlinear SMA ring segments, the modal participation factor response is determined for an external harmonic excitation applied to the shell along with induced SMA control forces, via sinusoidal and saw-tooth temperature profiles to generate desirable control forces and to eliminate the unwanted effects. Analysis results suggest that with proper choice of temperature waveform function to the SMA ring segments and minor modifications to frequency and phase, the SMA ring segments can attenuate unwanted external vibrations of cylindrical shells.

Fuzzy Controller For Active Vibration Control Of Cylindrical Shells

Experiment on Active Vibration Isolation of a Conical Shell Isolator

Optimal Control of Clamped-Free Conical Shell Using Diagonal Piezoelectric Sensor and Actuator

Spatially Filtered Vibration Control of Cylindrical Shells

Theoretical analysis of a multi-layered thin shell coupled with piezoelectric shell actuators for distributed vibration controls

Optimal vibration control of conical shells with collocated helical sensor/actuator pairs | Optymalne sterowanie drganiami powłok stożkowych za pomoca{ogonek} spiralnego skolokowanego układu czujnika i elementu wykonawczego

Microscopic actuation and optimal actuator locations of paraboloidal cylindrical shells

Active Pneumatic Vibration Control By Using Pressure And Velocity Measurements And Adaptive Fuzzy Sliding-Mode Controller

Multi-parameter optimization of piezoelectric actuators for multi-mode active vibration control of cylindrical shells

Wireless Active Vibration Control of Thin Cylindrical Shells Laminated with Photostrictive Actuators

Active Control of Nonlinear Piezoelectric Circular Shallow Spherical Shells

Vibration Control of Toroidal Shells with Parallel and Diagonal Piezoelectric Actuators

Nonlinear Dynamic Analysis and Control of FG Cylindrical Shell Fitted with Piezoelectric Layers

Forced Response of Cylindrical Shells Coupled with Nonlinear Shape-Memory-alloy (SMA) Actuators Regulated by Sinusoidal and Saw-Tooth Temperature Profiles

Optimal vibration control of conical shells with collocated helical sensor/actuator pairs

Optimal Control Of Piezoelectric Laminated Parabolic Cylindrical Panels

Vibration Control of Cylindrical Shell Panel with Shape Memory Alloy Actuators

Distributed actuation characteristics of clamped-free conical shells using diagonal piezoelectric actuators

Active Vibration Suppression of Payloads with a Conical Isolator

Haar Wavelet Fat-Based Adaptive Controller With Self-Tuning Fuzzy Compensation For A Piezoelectric-Actuated System Control

Distributed vibration control and identification of coupled elastic/piezoelectric shells: Theory and experiment