Abstract:Independent metering control systems are promising fluid power technologies compared with traditional valve controlled systems. By breaking the mechanical coupling between the inlet and outlet, the meter-out valve can open as large as possible to reduce energy consumptions. However, the lack of damping in outlet causes stronger vibrations. To address the problem, the paper designs a hybrid control method combining dynamic pressure feedback and active damping control. The innovation resides in the optimization of damping by introducing pressure feedback to make trade-offs between high stability and fast response. To achieve this goal, the dynamic response pertaining to the control parameters consisting of feedback gain and cut-off frequency, are analyzed via pole-zero locations. Accordingly, these parameters are tuned online in terms of guaranteed dominant pole placement such that the optimal damping can be accurately captured under a considerable variation of operating conditions. The experiment is deployed in a mini-excavator. The results pertaining to different control parameters confirm the theoretical expectations via pole-zero locations. By using proposed self-tuning controller, the vibrations are almost eliminated after only one overshoot for different operation conditions. The overshoots are also reduced with less decrease of the response time. In addition, the energy-saving capability of independent metering system is still not affected by the improvement of controllability. (C) 2017 Elsevier Ltd. All rights reserved.

Active Pneumatic Vibration Control By Using Pressure And Velocity Measurements And Adaptive Fuzzy Sliding-Mode Controller

Active Control for Non-Autonomous Diaphragm-Type Pneumatic Isolation System by Using an Augmented Adaptive Sliding-Mode Controller

Active suppression control of diaphragm-type pneumatic vibration isolators by using FAT-based adaptive controller with fuzzy compensation

Adaptive Wavelet Neural Network Controller for Active Suppression Control of a Diaphragm-Type Pneumatic Vibration Isolator

Parameter-dependent Vibration-Attenuation Controller Design for Electro-Hydraulic Actuated Linear Structural Systems

Fuzzy Controller For Active Vibration Control Of Cylindrical Shells

Performance Enhancement Of Pneumatic Vibration Isolators Using Self-Tuning Pid Feedback And Time-Delay-Control (Tdc)-Based Feedforward Scheme

Control Strategy of Pneumatic Integrated Active and Passive Vibration Isolator

Enhanced Pressure Control Using a Disturbance Observer for Active Pneumatic Vibration Isolator (PVI)

Model-Free Adaptive Sensing and Control for a Piezoelectrically Actuated System

Design of an Active Vibration Isolation Control Strategy Based on IFT Method

Haar Wavelet Fat-Based Adaptive Controller With Self-Tuning Fuzzy Compensation For A Piezoelectric-Actuated System Control

Self-Tuning Pressure-Feedback Control by Pole Placement for Vibration Reduction of Excavator with Independent Metering Fluid Power System

Vibration Control for Active Magnetic Bearing High-Speed Flywheel Rotor System with Modal Separation and Velocity Estimation Strategy

Experiments on Active Precision Isolation with A Smart Conical Adapter

Adaptive Sliding Controller with Self-Tuning Fuzzy Compensation for Vehicle Suspension Control

Piezo-Actuated Micro-Drilling Process Control by Using an Adaptive Sliding Controller with Fuzzy Compensation

Active Vibration Control of a High-Speed Flexible Robot Using Variable Structure Control

Micro-Drilling Process Control by Using Adaptive Sliding Controller

ACTIVE VIBRATION CONTROL USING DIRECT ADAPTIVE FUZZY SLIDING MODE CONTROLLER

Active vibration control of a flexible beam based on experimental modal analysis