Abstract:Compared with silicon and silicon carbide devices, the unique electrical and structural characteristics of gallium nitride high electron mobility transistors (GaN HEMTs) make them have different requirements for power module integration. This article proposes a novel integration scheme for the high-voltage lateral GaN HEMT dies without bonding wires. Based on the proposed integration scheme, a compact 650 V/30 A GaN power module with low parasitic parameters and high thermal performance is designed. The GaN dies are sandwiched between two ceramic substrates to improve thermal performance and ensure consistent thermal expansion coefficients. The multiple copper layer structure is used to increase wiring flexibility to reduce parasitic parameters. The design of gate and power loop layouts is discussed, and the common-mode (CM) capacitance is optimized. A comprehensive reliability evaluation is also carried out for this integration scheme. Finally, a double-sided cooling 650 V/30 A full-bridge GaN power module with 2.4 cm×1.3 cm×0.17 cm is fabricated. The thermal resistance is reduced by 30%–48% compared with the conventional single-sided cooling module. The power loop and gate loop inductances are reduced to 0.94 nH and 2 nH, respectively, and the CM capacitance is limited to 2.5 pF. The maximum dv/dt of the drain–source voltage is high as 150 V/ns with only 10% overshoot. Based on the power module, a 3.3-kW two-phase interleaved buck converter is developed. It has 820 W/in3 power density and 98.85% peak efficiency.

A Parallel Vertical Structure (PVS) Used in Highly Integrated GaN-Based Power Modules

A 2–10 MHz GaN HEMTs Half-Bridge Driver with Bandgap Reference Comparator Clamping and Dual Level Shifters for Automotive Applications

A GaN HEMTs Half-Bridge Driver with Bandgap Reference Comparator Clamping for High-Frequency DC-DC Converter.

A GaN HEMT Integrated Power Module with Silver Sintering Processes

Ultra-Low Inductance Design for A Gan Hemt Based 3L-Anpc Inverter

A Compact Double-Sided Cooling 650V/30A GaN Power Module With Low Parasitic Parameters

Design of Low-Inductance Switching Power Cell for GaN HEMT Based Inverter

A Highly Integrated PCB Embedded GaN Full-Bridge Module With Ultralow Parasitic Inductance

A Gallium Nitride Integrated Power Module with Ultra-low Parasitic Inductances and Thermal Resistance

A 3-D Integrated Power Module of GaN HEMTs Based on Silver Sintering Processes

650-V GaN-on-Si Power Integration Platform Using Virtual-Body p-GaN Gate HEMT to Screen Substrate-Induced Crosstalk

Design of Low Inductance SiC-MOS/Si-IGBT Hybrid Module for PV Inverters

An 8A 998A/inch<SUP>3</SUP> 90.2% Peak Efficiency 48V-to-1V DC-DC Converter Adopting On-Chip Switch and GaN Hybrid Power Conversion

A GaN Power Integration Platform Based on Engineered Bulk Si Substrate with Eliminated Crosstalk Between High-Side and Low-Side HEMTs

GaN on Engineered Bulk Silicon Power Integration Platform With Avalanche Capability Enabled by Built-in Si PN Junctions

Dual Active Bridge Based on High Voltage GaN Device

Design Strategy of Vertical GaN Power Schottky Barrier Diodes with P‐gan Junction Termination Extension and Experimental Demonstration of Selective P‐doping by Implantation

A Monolithic GaN Power Stage with Common-Mode Transient Immunity and Negative Voltage Operation Design for High Frequency Power Converters

Design and Optimization of Gate Driver Integrated Multichip 3-D GaN Power Module

GaN Power Integration Technology and Its Future Prospects

Low Parasitic-Inductance Packaging of a 650 V/150 A Half-Bridge Module Using Enhancement-Mode Gallium-Nitride High Electron Mobility Transistors