Abstract:To exploit the potential of wide-bandgap semiconductors in high-frequency applications, innovative packaging designs are developed to minimize the parasitic inductance of power modules. This study presents an integrated power module with a hybrid PCB/DBC structure, which uses top-side cooling prepackaged GaN enhancement-mode high-electron-mobility transistors. The module achieves a remarkably low parasitic inductance of 2.65 nH. However, there is relatively scarce research on the reliability of this heterostructure, particularly its sensitivity to thermomechanical stress due to the coefficients of thermal expansion mismatch among material interfaces. In this work, the thermal cycling characteristics of the integrated power module are comprehensively investigated. Electrical and thermal parameters were periodically and separately measured offline on a simplified package to monitor the health conditions and decouple possible synergy and competition effects among the failure modes from all packaging components. A thorough failure analysis was conducted using nondestructive visual inspections and scanning acoustic microscopy, complemented by destructive cross-sectional examination and scanning electron microscopy. The findings identified the delamination of the DBC upper copper layer, which exhibited a conchoidal fracture interface, as the primary factor that contributed to the failure of the power module with increased thermal resistance. Furthermore, the study dissected its initiation and propagation mechanisms. This investigation provides valuable insights for the development of more reliable low-inductance power module designs.

A Gallium Nitride Integrated Power Module with Ultra-low Parasitic Inductances and Thermal Resistance

A GaN HEMT Integrated Power Module with Silver Sintering Processes

A Compact Double-Sided Cooling 650V/30A GaN Power Module With Low Parasitic Parameters

A 2–10 MHz GaN HEMTs Half-Bridge Driver with Bandgap Reference Comparator Clamping and Dual Level Shifters for Automotive Applications

Ultra-Low Inductance Design for A Gan Hemt Based 3L-Anpc Inverter

A Double-Sided Cooling 650V/30A GaN Power Module with Low Parasitic Inductance

A 3-D Integrated Power Module of GaN HEMTs Based on Silver Sintering Processes

Design of Low Parasitic Inductance SiC MOSFETs Halfbridge Power Modules

A Highly Integrated PCB Embedded GaN Full-Bridge Module With Ultralow Parasitic Inductance

A High Density 400 W DC/DC Power Module with Integrated Planar Transformer and Half Bridge GaN IC

A Highly Integrated GaN Power Module with Low Parasitic Inductance and High Thermal Performance

A High Frequency High Efficiency GaN Based Bi-Directional 48V/12V Converter with PCB Coupled Inductor for Mild Hybrid Vehicle

Design of Low-Inductance Switching Power Cell for GaN HEMT Based Inverter

A Gallium Nitride Intelligent Power Module Based on Bonding Wire Interconnection

A Double-Sided Cooling GaN Power Module with High Thermal Performance

Low Parasitic-Inductance Packaging of a 650 V/150 A Half-Bridge Module Using Enhancement-Mode Gallium-Nitride High Electron Mobility Transistors

Thermal cycling characterization of an integrated low-inductance GaN eHEMT power module

Advanced GaN IPM for High-Frequency Converter Applications Enabled with Thin-Substrates

Electrothermal Comprehensive Optimization Design Considerations of GaN Power Module

Design and Optimization of Gate Driver Integrated Multichip 3-D GaN Power Module

Research on Parasitic Inductance Optimization of GaN Paralleled Cascode Power Module