Abstract:The silicon carbide (SiC) power module is one of the most popular semiconductor devices in industrial applications with the enhanced current rating. In this paper, a 1200-V/200-A SiC three-level (3L) module with neutral point clamped (NPC) topology is designed and validated. Compared with other existing works, the drain current of the designed module is accurately measured by a custom-made current transformer (CT) combined with a commercially off-the-shelf current probe (CP), which is critical for power loss evaluation. Based on the simulation and experiment results, it can be found that the maximum internal commutation loop stray inductance is no more than 40 nH, and the total switching loss can be reduced more than 30$\%$ compared with the hybrid 3L NPC module (Si IGBTs+SiC SBDs). Meanwhile, the power loss evaluation demonstrates that the designed 3L NPC module with all-SiC device is more suitable for high-voltage and high-frequency applications compared with its 2L counterpart, and the thermal simulation shows that the maximum junction temperature is less than 120 ${}^{\circ }$C when the module operates as a buck converter with $V_{DC}$ = 600 V, $I_{o}$ = 150 A, and $f_{s}$ = 100 kHz. In addition, compared with the 2L module, the 3L one presents enhanced spectrum amplitude in the high frequency (HF) range ($\ge$ 10 MHz) for the high-voltage applications, which indicates higher electromagnetic interference (EMI) noise. Then, two types of sunbber circuits are used to suppress the HF oscillation of the SiC 3L NPC module and alleviate the EMI noise as well according to the experiment results.

Design of Low Parasitic Inductance Three-level T-type SiC-MOS/Si-IGBT Module

Design of Low Inductance SiC-MOS/Si-IGBT Hybrid Module for PV Inverters

Design of Low Parasitic Inductance SiC MOSFETs Halfbridge Power Modules

Efficiency Improvement of 2- and 3-Level Inverters for Distributed Photovoltaic Application Using Hybrid Devices

Design and Evaluation of a SiC and Si IGBT Hybrid Three-Level ANPC Power Module

High Power Three-Level Rectifier Comprising SiC MOSFET & Si Diode Hybrid Power Stage

A Three-Phase-Module-Parallel Si & SiC Hybrid Inverter with Smaller Filter Size and Low Cost

Single-Source Cascaded Multilevel Inverter With Voltage-Boost Submodule and Continuous Input Current for Photovoltaic Applications

Analysis of A Low-Inductance Packaging Layout for Full-Sic Power Module Embedding Split Damping

A Novel SiC MOSFET Module for High-power Soft-switching Converter

An SiC MOSFET & Si Diode Hybrid Three-Phase High-Power Three-level Rectifier

A Gallium Nitride Integrated Power Module with Ultra-low Parasitic Inductances and Thermal Resistance

An Extremely High Efficient Three-Level Active Neutral-Point-Clamped Converter Comprising SiC and Si Hybrid Power Stages

Efficiency Improvement of Grid Inverters With Hybrid Devices

Fan-Out Panel-Level PCB-Embedded SiC Power MOSFETs Packaging

A Hybrid Three-Phase Seven-Level CHB Inverter with a Novel Modulation Scheme

Substrate Layout Evaluation for T-type Three-level IGBT Modules

A Quasi-Two-Level Medium-Voltage SiC MOSFET Power Module with Low Loss and Voltage Self-Balance

Design and Evaluation of a 1200-V/200-A SiC Three-Level NPC Power Module

Innovative Reverse Current Coupling Layout of SiC Power Module for Parasitic Inductance Reduction

Design, Packaging and Evaluation of an All-SiC-Based Four-Level ANPC Power Module