Abstract:Different micro-regions of weldment are expected to present various cyclic softening behaviours during creep-fatigue interaction (CFI), which has a significant influence on the remaining mechanical properties. The present work aims to investigate the cyclic softening and remaining creep behaviour of different micro-regions of P92 steel weldment using electron backscattered diffraction (EBSD) and nanoindentation technology. CFI tests were performed and interrupted at various pre-set fatigue cycles at elevated temperature of 650 degrees C and hold time of 180 s, and thereafter EBSD analyses, nanoindentation tests and high-temperature creep tests were conducted on these interrupted specimens. Experimental results reveal that the microstructure of the parent metal and fine austenite grain heat-affected zone, which is adjacent to the intercritical heat affected zone, are sensitive to CFI loading. Notably, the microstructural evolution in intercritical heat affected zone almost reaches saturated after fatigue cycles of 20%Nf. Nanoindentation results uncover that the intercritical heat affected zone exhibits the lowest elastic modulus and micro hardness, and with increasing the number of fatigue cycles, the weakest region changes. Accordingly, creep fracture location transits and creep life was degraded. Finally, a fatigue damage parameter based on the microhardness was developed to capture the effects of CFI on remaining creep life. (c) 2021 Published by Elsevier B.V. This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/).

Low-cycle Fatigue and Fracture Behaviour of 9%ni Steel Flux Cored Arc Welding Joint at Cryogenic Temperature

The Cryogenic Low-Cycle Fatigue Performance of 9%ni Steel Joint Made by Flux Cored Arc Welding

Cryogenic Fracture Toughness of 9%ni Steel Flux Cored Arc Welds

Study on high-cycle fatigue properties of 9 %Ni steel joints welded by GTAW and SAW using nickel-based alloy

Experimental Investigation of Stress Concentration and Fatigue Behavior in 9% Ni Steel Welded Joints under Cryogenic Conditions

The Influence of Microstructure Evolution in Thick Plate 9%ni Steel Submerged Arc Welding Joint on Fracture Toughness Properties

Fatigue Crack Growth Mechanism of Ni-based Weld Metal in a 9% Ni Steel Joint

Two Fatigue Fracture Modes at Different Temperatures of 10%cr Heat-Resistant Steel Weldment Filled with Ni-Based Alloy

Low Cycle Fatigue and Creep Fatigue Interaction Behavior of 9Cr-0.5Mo-1.8w-v-nb Heat-Resistant Steel at High Temperature

Microstructure Characteristics and Properties of Fusion Boundary in 9%ni Steel Joint Filled with Ni-based Alloy

Low Cycle Fatigue Properties of a 9–12% Cr Martensitic Steel Welded Joint with Ni-based Weld Metal Based on a Local Strain Approach

Low-cycle Fatigue Behaviors of a New Type of 10% Cr Martensitic Steel and Welded Joint with Ni-based Weld Metal

Remaining creep properties and fracture behaviour of P92 steel welded joint under prior low cycle fatigue loading

Effect of Temperature on High‐cycle Fatigue and Very High Cycle Fatigue Behaviours of a Low‐strength Cr–Ni–Mo–V Steel Welded Joint

Experimental and Numerical Characterization of Low Cycle Fatigue and Creep Fatigue Behaviour of P92 Steel Welded Joint

Characterization of the Cyclic Softening and Remaining Creep Behaviour of P92 Steel Weldment

Near-threshold fatigue crack growth behavior of 10% Cr martensitic steel welded joint with 9% Cr weld metal in high temperature air

Microstructure Characterization and HCF Fracture Mode Transition for Modified 9Cr-1Mo Dissimilarly Welded Joint at Different Elevated Temperatures

Effect of Carbon Migration on Interface Fatigue Crack Growth Behavior in 9cr/crmov Dissimilar Welded Joint

Tensile Properties and Fracture Behavior of Friction Stir Welded Joints of Fe-32Mn-7Cr-1Mo-0.3N Steel at Cryogenic Temperature

Failure Mechanisms and Design of Dissimilar Welds of 9%cr and CrMoV Steels Up to Very High Cycle Fatigue Regime