Abstract:High manganese steels have been nominated as desirable materials used for various cryogenic applications due to their excellent cryogenic toughness caused by twinning. High manganese steel welded joints were obtained through gas metal arc welding, and the microstructural differences at three subzones of heat-affected zone (HAZ) were utilized. The aim was to investigate the effect of grain size and Mn/C/Cu segregation on the cryogenic toughness mechanism of high manganese steel welded joints. The results indicate that the average impact absorbed energies at −196 °C for 1.0, 3.0, and 5.0 mm from the fusion line (denoted by FL + 1, FL + 3, and FL + 5) is 118.6 J, 102.4 J, and 117.2 J, respectively. Compared with base metal, the embrittlement occurred in HAZ. Large grains improve toughness, while small grain boundaries, segregation, and precipitation in HAZ deteriorate toughness. Larger grain size facilitates the primary twins with thinner inter-twin spacing and twin thickness, and the high density of these primary twins inhibits the activation of secondary twins. This, in turn, enhances cryogenic impact toughness. Although the stacking fault energy (SFE) throughout the welding joint lays within the range for the twinning-induced plasticity effect, the enrichment of Mn/C/Cu slightly increases the local SFE and critical resolved shear stress for twining within the segregation zone. This phenomenon makes the activation of primary twins more challenging. Furthermore, the C segregation at grain boundaries leads to the precipitation of fine Cr 23 C 6 carbides. These carbides serve as crack initiation points during impact tests, contributing to degradation in cryogenic impact toughness.

Effect of Gradient Microstructure and Strength Mismatch on Cryogenic Toughness of Fe-Ni Fusion Boundary

Characterization of Ductile Nano-Tic Dispersed V4Cr4Ti/RAFMs Solid Diffusion Joint for Nuclear Fusion Reactor Application

Effect of grain size and segregation on the cryogenic toughness mechanism in heat-affected zone of high manganese steel

Precipitation behavior of carbides and cryogenic toughness in heat-affected zone of high-Mn twinning-induced plasticity steel welded joint

Tailoring the Microstructure to Enhance the Cryogenic Mechanical Properties of a Fe–34.5mn–0.04c Steel

Influence of banded ε-martensite and deformation twin on cryogenic toughness of Fe-Mn-xAl-C steel

Impact toughness and fracture behaviour of a lamellar structural Fe–Mn–Al–C cryogenic steel

Effects of deformation-induced martensitic transformation on cryogenic fracture toughness for metastable Si8V2Fe45Cr10Mn5Co30 high-entropy alloy

Effect of aging temperature on the austenite reversion and mechanical properties of a Fe–10Cr–10Ni cryogenic maraging steel

An extraordinary improvement in cryogenic toughness of K-TIG welded 9Ni steel joint assisted by alternating axial magnetic field

Cryogenic Toughness in a Low-Cost Austenitic Steel

Investigation on the weakest zone in toughness of 9Cr/NiCrMoV dissimilar welded joint and its enhancement

The Effect of Microstructure on the Fatigue Crack Growth Behavior of Ni-Cr-Mo-V Steel Weld Metal

Dissimilar Laser Welding of CrMnFeCoNi High Entropy Alloy and 316LN Stainless Steel for Cryogenic Application

Evaluation of localized mechanical properties of modified N50 welded joints at cryogenic temperature through a digital image correlation technique

Microstructure evolution and impact toughness variation for high strength steel multi-pass weld metals with various cooling rates

Evolution mechanism of interfacial microstructure and its effect on failure in dissimilar metal welds containing ferritic heat resistant steels

Microstructural and chemical dependences of fracture toughness in stainless steel welds at 4.2 K

Enhancement of Yield Strength by Chromium/Nitrogen Alloying in High-Manganese Cryogenic Steel

The Effect of Microstructure and Welding-Induced Plasticity on the Strength of Ni–Mo–Cr Alloy Welds

Factors Influencing Notch Toughness of Coarse-grained Heat Affected Zone for 9% Ni Steel