Abstract:Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, Ahead of Print. The Cu–6Al–2Ni alloy has much higher ultimate tensile strength compared to pure copper and may potentially replace it in the dissimilar joints between titanium alloys and stainless steels. Laser welding of aluminum bronze to stainless steel has not been reported in the scientific literature, which motivated the present weldability study of Cu–6Al–2Ni/316L dissimilar joint with a continuous ytterbium Yb:YAG laser. Different laser spot offsets from the joint line were selected in order to produce the joints with various dilutions of welded materials. Scanning electron microscopy with energy-dispersive X-ray spectroscopy (SEM-EDS) probe and X-ray diffraction (XRD) analyses of the melted zones were performed, along with microhardness measurements and tensile testing. The phase evolution in the obtained microstructures was evaluated using Thermo-Calc software. For the dilutions ranging from 23 to 63 at.% Cu, the melted zones showed globular microstructures with primary and secondary phase separation due to the miscibility gap existing in the Cu–Fe system. Lower Cu contents resulted in cellular γ-Fe structures with rare globular Cu-rich inclusions. The XRD analysis indicated the presence of ∼10% of ternary AlFe2Ni phase, however, it did not harm the mechanical properties of the welds. According to Thermo-Calc, this phase is formed from γ-Fe during the cooling process. Microhardness measurements did not indicate the embrittlement of the melted zones, which can be explained by the submicronic dispersion of AlFe2Ni. The welds exhibited a ductile fracture in Cu–6Al–2Ni at ultimate tensile strength of 350–420 MPa in a wide range of laser offsets, which is much higher than previously reported results for pure copper/316L joints.

Dissimilar Laser Welding of CrMnFeCoNi High Entropy Alloy and 316LN Stainless Steel for Cryogenic Application

Dissimilar laser welding of a CoCrFeMnNi high entropy alloy to 316 stainless steel

Unprecedented Combination of Strength and Ductility in Laser Welded NiCoCr Medium Entropy Alloy Joints

Improving the ductility in laser welded joints of CoCrFeMnNi high entropy alloy to 316 stainless steel

High Strength-Ductility Synergy in a Laser Welded Dissimilar Joint of CrCoNi Medium-Entropy Alloy and Stainless Steel

Pivotal Microstructural Characteristics to Determine the Cryogenic Impact Toughness of Dissimilar Joint Between SA645 and AISI304L Made by Autogenous Fiber Laser Welding

High-Strength Ductility Joining of Multicomponent Alloy to 304 Stainless Steel Using Laser Welding Technique.

Microstructure and Mechanical Properties of Fiber Laser Welded Joints of CoCrFeNiCu High-Entropy Alloy and 304 Stainless Steel

Investigation on Microstructure and Properties of Dissimilar Joint Between SA553 and SUS304 Made by Laser Welding with Filler Wire

Dissimilar Laser Welding of Superelastic NiTi and CuAlMn Shape Memory Alloys

The Interface Microstructure, Mechanical Properties and Corrosion Resistance of Dissimilar Joints During Multipass Laser Welding for Nuclear Power Plants

Formation, Microstructure, and Properties of Dissimilar Welded Joint between CrMnFeCoNi and Fe

Unravelling Asymmetrical Microstructure Evolution and Tensile Fracture Mechanism in Laser Welding of Dissimilar 2219/2195 Aluminum Alloys

Dissimilar welding between Cu–6Al–2Ni alloy and stainless steel 316L using continuous ytterbium YAG laser

The Microstructures and Mechanical Properties of Dissimilar Laser Welding of Copper and 316L Stainless Steel with Ni Interlayer

Dissimilar laser welding of an as-rolled CoCrFeMnNi high entropy alloy to Inconel 718 superalloy

Microstructure and Mechanical Properties of Laser Welded TC4 Titanium Alloy/304 Stainless Steel Joint with (Cocrfeni)100-Xcux High-Entropy Alloy Interlayer

The Microstructure and Mechanical Properties of Novel Cryogenic Twinning-Induced Plasticity Steel Welded Joint

The laser welded joints properties of cryogenic austenitic nitrogen-containing steel*

Microstructure and tensile properties of dissimilar metal joints between FeCoCrNiMn alloy and stainless steel using CoCrNiMn powders as filler material

Microstructure, Macrosegregation, and Mechanical Properties of NiTi to Ti6Al4V Dissimilar Laser Welds Using Co Interlayer