Abstract:Al x CoCrFeNi high entropy alloy (HEA) system has received extensive attention of researchers as it shows a dynamic change in phase fraction and properties in response to variation in the Al content. In this study, Al x CoCrFeNi HEAs were welded using a laser beam welding and microstructural evolution and mechanical properties were studied using X-ray diffraction, electron backscatter diffraction, scanning electron microscopy, hardness and tensile tests. Results revealed that, the laser-welded Al 0.3 alloy exhibited an increased tensile strength but a minor decrease in ductility as compared to that of the base metal (BM) Conversely, the laser-welded Al 0.5 and Al 0.7 alloys, characterized by a dual-phase structure, demonstrated a simultaneous decrease in both strength and ductility. The hardness of Al 0.3 increased from 156 HV for base metal (BM) to 197 HV for weld zone (WZ). A drastic drop in the hardness in the fusion zone was observed for Al 0.5 (from 242 HV for BM to 212 HV for WZ) and Al 0.7 (from 387 HV for BM to 260 HV for WZ). The decrease in hardness for welded Al 0.5 and Al 0.7 alloy may be attributed to reduced fraction of secondary BCC/B2 phase in the microstructure. Texture analysis of the welded samples reveals columnar grains with a texture fibre in the welded Al 0.3 and Al 0.5 alloys. However, the welded Al 0.7 alloy has a dendritic structure with random texture due to the enhanced rate of constitutional supercooling arising from the higher fraction of secondary phases. The combined effect of changes in phase distribution, texture, and grain size might be the reasons for the variation in mechanical properties of the welded alloy.

Microstructure and Mechanical Properties of Fiber Laser Welded Joints of CoCrFeNiCu High-Entropy Alloy and 304 Stainless Steel

Study on Microstructure of Fiber Laser Welding of CoCrCuFeNi High Entropy Alloy

Dissimilar laser welding of a CoCrFeMnNi high entropy alloy to 316 stainless steel

Inhomogeneity of microstructure and mechanics of laser welded CoCrFeNiAl0.3 high entropy alloy

Microstructure and tensile properties of dissimilar metal joints between FeCoCrNiMn alloy and stainless steel using CoCrNiMn powders as filler material

Improving the ductility in laser welded joints of CoCrFeMnNi high entropy alloy to 316 stainless steel

Microstructure and mechanical properties of electron beam welded joints of GH3128 and CoCrFeNi high-entropy alloy

Fatigue behaviour of a laser beam welded CoCrFeNiMn-type high entropy alloy

Laser beam welding of AlCoCrFeNi2.1 eutectic high-entropy alloy

Effect of copper on microstructural evolution and mechanical properties of laser-welded CoCrFeNi high entropy alloy

Microstructural Evolution and Mechanical Properties of Laser Beam Welded AlxCoCrFeNi High Entropy Alloys

Microstructure and mechanical properties of gas metal arc welded CoCrFeMnNi joints using a 308 stainless steel filler metal

Research on hot cracking in laser welding of Al-contaminated CoCrFeMnNi high-entropy alloys

Dissimilar Laser Welding of CrMnFeCoNi High Entropy Alloy and 316LN Stainless Steel for Cryogenic Application

Microstructure and Mechanical Properties of Fiber Laser Welded QP980 Steel

Effects of Interlaminar Microstructural Inhomogeneity on Mechanical Properties and Corrosion Resistance of Multi-Layer Fiber Laser Welded High Strength Low Alloy Steel

Enhancing microstructural and mechanical characteristics of laser welded NiTi SMA/304 SS lap joints with medium and high entropy alloy fillers

Microstructure and mechanical properties of electron beam welding of AlCoCrFeNi 2.1 eutectic high entropy alloy

Microstructure evolution and mechanical properties of Al CoCrFeNi high-entropy alloys by laser melting deposition

Electron-beam welding of high-entropy alloy and stainless steel: microstructure and mechanical properties

Welding Dissimilar Alloys of CoCrFeMnNi High-Entropy Alloy and 304 Stainless Steel Using Gas Tungsten Arc Welding