Abstract:Al x CoCrFeNi high entropy alloy (HEA) system has received extensive attention of researchers as it shows a dynamic change in phase fraction and properties in response to variation in the Al content. In this study, Al x CoCrFeNi HEAs were welded using a laser beam welding and microstructural evolution and mechanical properties were studied using X-ray diffraction, electron backscatter diffraction, scanning electron microscopy, hardness and tensile tests. Results revealed that, the laser-welded Al 0.3 alloy exhibited an increased tensile strength but a minor decrease in ductility as compared to that of the base metal (BM) Conversely, the laser-welded Al 0.5 and Al 0.7 alloys, characterized by a dual-phase structure, demonstrated a simultaneous decrease in both strength and ductility. The hardness of Al 0.3 increased from 156 HV for base metal (BM) to 197 HV for weld zone (WZ). A drastic drop in the hardness in the fusion zone was observed for Al 0.5 (from 242 HV for BM to 212 HV for WZ) and Al 0.7 (from 387 HV for BM to 260 HV for WZ). The decrease in hardness for welded Al 0.5 and Al 0.7 alloy may be attributed to reduced fraction of secondary BCC/B2 phase in the microstructure. Texture analysis of the welded samples reveals columnar grains with a texture fibre in the welded Al 0.3 and Al 0.5 alloys. However, the welded Al 0.7 alloy has a dendritic structure with random texture due to the enhanced rate of constitutional supercooling arising from the higher fraction of secondary phases. The combined effect of changes in phase distribution, texture, and grain size might be the reasons for the variation in mechanical properties of the welded alloy.

Inhomogeneity of microstructure and mechanics of laser welded CoCrFeNiAl0.3 high entropy alloy

Microstructure and Mechanical Properties of Fiber Laser Welded Joints of CoCrFeNiCu High-Entropy Alloy and 304 Stainless Steel

Study on Microstructure of Fiber Laser Welding of CoCrCuFeNi High Entropy Alloy

Microstructural Evolution and Mechanical Properties of Laser Beam Welded AlxCoCrFeNi High Entropy Alloys

Fatigue behaviour of a laser beam welded CoCrFeNiMn-type high entropy alloy

Research on hot cracking in laser welding of Al-contaminated CoCrFeMnNi high-entropy alloys

Dissimilar laser welding of a CoCrFeMnNi high entropy alloy to 316 stainless steel

Improving the ductility in laser welded joints of CoCrFeMnNi high entropy alloy to 316 stainless steel

Laser beam welding of AlCoCrFeNi2.1 eutectic high-entropy alloy

Microstructural Inhomogeneity in the Fusion Zone of Laser Welds

Effect of copper on microstructural evolution and mechanical properties of laser-welded CoCrFeNi high entropy alloy

Microstructure evolution and mechanical properties of Al CoCrFeNi high-entropy alloys by laser melting deposition

Microstructure and mechanical properties of electron beam welded joints of GH3128 and CoCrFeNi high-entropy alloy

Microstructure and mechanical properties of electron beam welding of AlCoCrFeNi 2.1 eutectic high entropy alloy

Unravelling Asymmetrical Microstructure Evolution and Tensile Fracture Mechanism in Laser Welding of Dissimilar 2219/2195 Aluminum Alloys

Electron-beam welding of high-entropy alloy and stainless steel: microstructure and mechanical properties

Dissimilar Laser Welding of CrMnFeCoNi High Entropy Alloy and 316LN Stainless Steel for Cryogenic Application

The Control of Fully Equiaxed Microstructure in Laser Welding Al-Mg-Er-Zr Alloy

On the investigation of microstructure and mechanical properties of the AlCoCrFeNi 2.1 /316 L dissimilar spot-welded joint

Microstructure and tensile properties of dissimilar metal joints between FeCoCrNiMn alloy and stainless steel using CoCrNiMn powders as filler material

Formation, Microstructure, and Properties of Dissimilar Welded Joint between CrMnFeCoNi and Fe