Abstract:Earthquake-induced fractures in steel structures are characterised by high-strain low-cycle conditions. In order to investigate the ultra-low cyclic fatigue fracture of steel welded joints under earthquakes, two most commonly used structural steels (Q235B and Q345B) and the corresponding welds were studied by experiments and numerical analysis in this paper. Specimens were extracted from the base material, the weld metal and the heat affected zone to investigate the behaviour in different parts of the welded joint. Eighteen smooth round bars were tested under large strain amplitudes, the hysteretic properties, damage degradation characteristics and failure process were analyzed. Constitutive model named Chaboche model was calibrated to describe the cyclic hardening behaviour of these materials. Seventy-two notched round bars with three different notch sizes and two loading protocols were tested to study the fracture behaviour of different materials at different stress triaxialities and different strain amplitudes. Two micromechanical fracture models: cyclic void growth model and degraded significant plastic strain model were calibrated based on the test results. The micromechanical models and Chaboche model were incorporated into numerical simulations by software ABAQUS with subroutine VUMAT to predict the materials fracture. The results show that the failure process under cyclic loads is opposite to that of monotone loads. The dissipation capacity of Q345B is superior to that of Q235B. The fracture resistance deteriorate more in the weld zone under the same loading conditions. The validated models can be used to effectively and accurately evaluate the fracture in steel welded connections under ULCF conditions.

Low Cycle Fatigue Properties and Fracture Mechanism of Q345qC Steel and Its Welded Joint

Prediction of the Ultra-Low-Cycle Fatigue Damage of Q345qC Steel and Its Weld Joint

A Modified Coffin-Manson Model for Ultra-Low Cycle Fatigue Fracture of Structural Steels Considering the Effect of Stress Triaxiality

Study on the Prediction Method of the Ultra-Low-Cycle Fatigue Damage of Steel

Fatigue Testing in Welded Joint of 980- grade Steels

Improved Ultra-Low Cycle Fatigue Fracture Models for Structural Steels Considering the Dependence of Cyclic Damage Degradation Parameters on Stress Triaxiality

Fatigue life assessment of Q345 steel fillet welded joints with competitive failure modes

Ultra-high Cycle Fatigue Behaviors of Q345 Bridge Steel Welded Joint

Ultra-Low Cyclic Fatigue Fracture of Q235B and Q345B Steels and Their Butt Welded Joints

Fatigue Behavior of Low Alloy Structural Steel Single-Lap Bolt-Welded Joint

EXPERIMENTAL RESEARCH ON FATIGUE PERFORMANCE AND FRACTURE MECHANISM OF Q345QD BUTT WELDS

Low cycle fatigue analysis of welded joints considering material cycling behavior

Ultra-low Cycle Fatigue Fracture of High-Strength Steel Q460C and Its Weld

Biaxial Very High Cycle Fatigue Testing and Failure Mechanism of Welded Joints in Structural Steel Q345

Experimental and Numerical Characterization of Low Cycle Fatigue and Creep Fatigue Behaviour of P92 Steel Welded Joint

Abnormal Relation Between Tensile and Fatigue Strengths for a High-Strength Low-Alloy Steel

Study on Fatigue Behavior and Crack Propagation Life of Longitudinal Fillet Welded Lap Joint

EXPERIMENTAL INVESTIGATION ON FATIGUE PROPERTIES OF Q345QD AND ITS FATIGUE FRACTURE MECHANISM

High-Cycle, Low-Cycle, Extremely Low-Cycle Fatigue and Monotonic Fracture Behaviors of Low-Carbon Steel and Its Welded Joint

Experimental and Numerical Study of Combined High and Low Cycle Fatigue Performance of Low Alloy Steel and Engineering Application