Abstract:The residue amplifier (RA) in a pipelined-SAR ADC eases the noise requirement of the back-end stage, making the architecture energy-efficient. However, to achieve high precision, the RA requires both a substantial gain and a high level of linearity. Conventionally, the requirement is met using a closed-loop amplifier [1– 2]. However, it consumes a significant amount of power to attain a sufficient bandwidth for settling. To address this problem, the open-loop amplifier has been introduced for energy efficiency [3– 4]. Nevertheless, the properties of poor linearity, insufficient gain, and limited output swing restrict its application scenarios. This work presents a 50MS/s pipelined SAR ADC using a cascode capacitively degenerated dynamic amplifier (CCD-DA), which possesses inherent linearity and boosted gain as the residue amplifier. Additionally, a PTAT bias current is employed to ensure PVT robustness. Furthermore, the MSB pre-conversion technique is proposed to further extend the output swing of the dynamic amplifier. The prototype ADC achieves 73.9dB SNDR and 89.4dB SFDR at Nyquist input while consuming only 0.36mW. This corresponds to the best Walden FoM of 1.78fJ/conv.- step and the best Schreier FoM of 182.3dB among the state-of-the-art work compared in Fig 9.4.6 with equivalent or higher sampling rates.

Effective Gain Analysis and Statistic Based Calibration for Ring Amplifier with Robustness to PVT Variation

A 625ms/s, 12-Bit, SAR Assisted Pipeline ADC with Effective Gain Analysis for Inter-stage Ringamps

A 6.512-GHz Balanced Variable-Gain Low-Noise Amplifier With Frequency-Selective Gain Equalization Technique

Design and Optimization of a Milli-Meter Wave Amplifier Using Nano-Scale CMOS Devices

A 6.5-12 GHz Balanced Variable Gain Low-Noise Amplifier with Frequency-Selective Non-Foster Gain Equalization Technique

A Single-Stage Gain-Boosted Cascode Amplifier with Three-Layer Cascode Feedback Amplifier for Front-End SHA in High-Linearity Pipelined ADC

A Linear-in-Decibel Automatic Gain Control Amplifier with Dual Mode Continuous Gain Tuning

A Wideband BiCMOS Variable Gain Amplifier with Novel Continuous Db-Linear Gain Control and Temperature Compensation

Design of a Ring-Amplifier Robust Against PVT Variations in Deep-Nanoscale FinFET CMOS

A Single-Channel 1.25-Gs/s 11-Bit Pipelined ADC with Robust Floating-Powered Ring Amplifier and First-Order Gain Error Calibration.

A Residue Amplifier with 85 Db DC Gain and 15 GHz Closed-Loop Bandwidth for 14-Bit 3GSPS Pipeline ADC.

A Floating-Ring Hybrid Amplifier Insensitive to PVT and Common-mode Variation Without CMFB for High-Speed ADCs

A Ring Amplifier Based Current Feedback Continuous Time PGA for High Frequency Ultrasound Applications

A 800 MS/s, 12-Bit, Ringamp-Based SAR Assisted Pipeline ADC with Gain Error Cancellation

A 13.5-ENOB, 107-μW Noise-Shaping SAR ADC With PVT-Robust Closed-Loop Dynamic Amplifier

A 71.5-Db SNDR 475-Ms/s Ringamp-Based Pipelined SAR ADC with On-Chip Bit-Weight Calibration

A 348-Μw 68.8-Db SNDR 20-Ms/s Pipelined SAR ADC with a Closed-Loop Two-Stage Dynamic Amplifier

A Fast Settling Low Noise Ring Amplifier for High Speed Pipelined SAR ADCs

9.4 A 182.3dB FoM<inf>s</inf> 50MS/s Pipelined-SAR ADC using Cascode Capacitively Degenerated Dynamic Amplifier and MSB Pre-Conversion Technique

A 172Db-Fom Pipelined SAR ADC Using a Regenerative Amplifier with Self-Timed Gain Control and Mixed-Signal Background Calibration

A 2.5-Gs/s Time-Interleaved SAR-Assisted Ringamp-Based Pipelined ADC with Digital Background Calibration