Abstract:Many applications, such as multi-standard wireless and event-driven IoT devices, demand high-resolution ADCs with scalable sampling rate and power consumption. The conventional pipelined ADC can achieve high resolution, but its power does not scale well with the sampling rate due to the use of a closed-loop static OTA for residue amplification. While the OTA can be turned off to save power, it requires considerable time for the bias circuit and CMFB loop to settle when waking up, leading to wasted power and reduced peak operation frequency. Using an open-loop dynamic amplifier can make power scale linearly with frequency, but its gain varies with PVT and often requires background calibration, which converges slowly and is incompatible with event-driven applications. The ring-amp is a promising solution as it features closed-loop operation, easy duty-cycling, and decaying power over time [1]-[4]. However, its stability depends on the dead zone size, which typically requires trimming across PVT variations. Besides, the 1st stage has a constant operating point during amplification, which consumes considerable energy. A recent work proposed a 2-stage floating inverter amplifier (FIA) that is fully dynamic and works in closed-loop [5]. It guarantees stability and does not need dead zone control. Moreover, the power consumptions of all stages decay over time naturally. Nevertheless, its low open-loop gain of 33dB is inadequate for a high-resolution pipelined ADC, and its fast-quenching 2 <sup>nd</sup> stage reduces the amplifier speed, limiting the usage in high-speed designs.

Design of a Ring-Amplifier Robust Against PVT Variations in Deep-Nanoscale FinFET CMOS

The Design of a Low-Voltage Rail-to-Rail CMOS Operational Amplifier

Design and Optimization of a Milli-Meter Wave Amplifier Using Nano-Scale CMOS Devices

A novel accurate dB-linear control circuit topology for variable gain amplifiers in BiCMOS technology

Effective Gain Analysis and Statistic Based Calibration for Ring Amplifier with Robustness to PVT Variation

A Fast Settling Low Noise Ring Amplifier for High Speed Pipelined SAR ADCs

Design of Differential Variable-Gain Transimpedance Amplifier in 0.18 Μm SiGe BiCMOS

Fully Differential mm / sub-mm Wave CMOS Amplifiers

A 625ms/s, 12-Bit, SAR Assisted Pipeline ADC with Effective Gain Analysis for Inter-stage Ringamps

Process Invariant Biasing of Ring Amplifiers Using Deadzone Regulation Circuit

Technology Generic Delta-Sigma ADC Design with Gm/id Methodology

A Floating-Ring Hybrid Amplifier Insensitive to PVT and Common-mode Variation Without CMFB for High-Speed ADCs

An Improved Ring Amplifier with Process- and Supply Voltage-Insensitive Dead-Zone

A Single-Channel 1.25-Gs/s 11-Bit Pipelined ADC with Robust Floating-Powered Ring Amplifier and First-Order Gain Error Calibration.

A Ring Amplifier Based Current Feedback Continuous Time PGA for High Frequency Ultrasound Applications

A Novel Ring Amplifier with Low Common-Mode Voltage Variation and Noise Reduction Using Floating Power Technique.

A 0.004mm2 200MS/S Pipelined SAR ADC with Kt/c Noise Cancellation and Robust Ring-Amp

Design of a novel CMOS instrumentation amplifier using 90 nm technology

A 0.4-to-40MS/s 75.7dB-SNDR Fully Dynamic Event-Driven Pipelined ADC with 3-Stage Cascoded Floating Inverter Amplifier

A Residue Amplifier with 85 Db DC Gain and 15 GHz Closed-Loop Bandwidth for 14-Bit 3GSPS Pipeline ADC.

Design of High Performance Operational Transconductance Amplifier