Abstract:Next-generation wireless standards (e.g., WiFi-7) advancing towards wider bandwidth and higher order modulation require ADCs with GHz sampling rates and over 12b resolution. Although conventional pipelined ADCs can satisfy the speed and resolution specifications, their power is usually too high for handset applications, for which $\leq 10\text{mW}$ per channel is desired. Alternatively, time-interleaved (TI) ADCs achieve low power by harnessing efficient low-speed SAR sub-ADCs. However, background timing-skew calibrations bring considerable overhead and place limitations on the input signal. The pipeline/TI-SAR hybrid architecture places the interleaved SAR at the $2^{\text{nd}}$ pipeline stage to avoid the timing skew problem [1]. As the SAR consumes low power and can run asynchronously, this greatly reduces the pipeline backend power and simplifies the clock distribution. However, the residue amplifier is still a power efficiency bottleneck as in a conventional pipeline. In [1], the architecture advantages are shaded by its power-hungry telescopic OTA. This work proposes a ring amplifier with split MDAC to boost the efficiency of the pipelined TI-SAR architecture, which enables a 1GS/s 10-ENOB ADC which consumes only 6.9mW. For high-speed ADCs, the power and area overhead of the reference buffer is also a critical issue. This work proposes a reference decoupling capacitor (de-cap) switching technique that reduces the reference buffer power to only 3.7mW, and the total de-cap size to only 44pF, while maintaining excellent high-frequency performance. Overall, this work achieves $\text{FoM}_{\mathrm{s}}$ of 171.1 and 169.2dB with or without the reference buffer, which outperforms all reported works with $\mathrm{f}_{\mathrm{s}} > 600\text{MS}/\mathrm{s}$ .

A 0.004mm2 200MS/S Pipelined SAR ADC with Kt/c Noise Cancellation and Robust Ring-Amp

A 0.004-Mm2 200-Ms/s Pipelined SAR ADC with Kt/c Noise Cancellation and Robust Ring-Amp

A SAR ADC with Reduced kT/C Noise by Decoupling Noise PSD and BW

A 14-Bit 500-Ms/s Pipelined-SAR ADC in 28-Nm CMOS with Foreground and Background Calibration

A 14bit 500MS/s 85.62dBc SFDR 66.29dB SNDR SHA-less pipelined ADC with a stable and high-linearity input buffer and aperture-error calibration in 40nm CMOS

A 13-Bit 0.005-Mm2 40-Ms/s SAR ADC with Kt/c Noise Cancellation

A 10mw 10-ENOB 1gs/s Ring-Amp-Based Pipelined TI-SAR ADC with Split MDAC and Switched Reference Decoupling Capacitor.

9.1 A 2mW 70.7dB SNDR 200MS/s Pipelined-SAR ADC with Continuous-Time SAR-Assisted Detect-and-Skip and Open-then-Close Correlated Level Shifting.

A 12bit 160ms/s Pipelined SAR ADC with a MOS Self-Biased Cascoded Ring Amplifier

A 2-Mw 70.7-Db SNDR 200-Ms/s Pipelined-SAR ADC Using Continuous-Time SAR-Assisted Detect-and-Skip and Open-Then-Close Correlated Level Shifting

A 800 MS/s, 12-Bit, Ringamp-Based SAR Assisted Pipeline ADC with Gain Error Cancellation

16.5 A 13b 0.005mm<sup>2</sup> 40MS/s SAR ADC with kT/C Noise Cancellation

A 625ms/s, 12-Bit, SAR Assisted Pipeline ADC with Effective Gain Analysis for Inter-stage Ringamps

A 0.4-to-40MS/s 75.7dB-SNDR Fully Dynamic Event-Driven Pipelined ADC with 3-Stage Cascoded Floating Inverter Amplifier

17.5 A 10mw 10-ENOB 1gs/s Ring-Amp-Based Pipelined TI-SAR ADC with Split MDAC and Switched Reference Decoupling Capacitor

16.5 A 13b 0.005mm2 40ms/s SAR ADC with Kt/c Noise Cancellation

3.4 A 0.01mm2 25µw 2ms/s 74Db-Sndr Continuous-Time Pipelined-SAR ADC with 120ff Input Capacitor

A 12-bit 100-MSps pipelined-SAR ADC with a time-interleaved second-stage

A 10b 1.25GS/s Residue Post-Amplified Pipelined-SAR ADC with Supply-and-Temperature Stabilized Open-Loop Residue Amplifier.

A 2.5-Gs/s Time-Interleaved SAR-Assisted Ringamp-Based Pipelined ADC with Digital Background Calibration

A 2.5-Gs/s Four-Way-Interleaved Ringamp-Based Pipelined-SAR ADC with Digital Background Calibration in 28-Nm CMOS