Abstract:Next-generation wireless standards (e.g., WiFi-7) advancing towards wider bandwidth and higher order modulation require ADCs with GHz sampling rates and over 12b resolution. Although conventional pipelined ADCs can satisfy the speed and resolution specifications, their power is usually too high for handset applications, for which $\leq 10\text{mW}$ per channel is desired. Alternatively, time-interleaved (TI) ADCs achieve low power by harnessing efficient low-speed SAR sub-ADCs. However, background timing-skew calibrations bring considerable overhead and place limitations on the input signal. The pipeline/TI-SAR hybrid architecture places the interleaved SAR at the $2^{\text{nd}}$ pipeline stage to avoid the timing skew problem [1]. As the SAR consumes low power and can run asynchronously, this greatly reduces the pipeline backend power and simplifies the clock distribution. However, the residue amplifier is still a power efficiency bottleneck as in a conventional pipeline. In [1], the architecture advantages are shaded by its power-hungry telescopic OTA. This work proposes a ring amplifier with split MDAC to boost the efficiency of the pipelined TI-SAR architecture, which enables a 1GS/s 10-ENOB ADC which consumes only 6.9mW. For high-speed ADCs, the power and area overhead of the reference buffer is also a critical issue. This work proposes a reference decoupling capacitor (de-cap) switching technique that reduces the reference buffer power to only 3.7mW, and the total de-cap size to only 44pF, while maintaining excellent high-frequency performance. Overall, this work achieves $\text{FoM}_{\mathrm{s}}$ of 171.1 and 169.2dB with or without the reference buffer, which outperforms all reported works with $\mathrm{f}_{\mathrm{s}} > 600\text{MS}/\mathrm{s}$ .

3.4 A 0.01mm2 25µw 2ms/s 74Db-Sndr Continuous-Time Pipelined-SAR ADC with 120ff Input Capacitor

A SAR ADC with Reduced kT/C Noise by Decoupling Noise PSD and BW

A 16-Bit 2.5-Ms/s SAR ADC with On-Chip Foreground Calibration

A 14-Bit 500-Ms/s Pipelined-SAR ADC in 28-Nm CMOS with Foreground and Background Calibration

A 0.004mm2 200MS/S Pipelined SAR ADC with Kt/c Noise Cancellation and Robust Ring-Amp

A 1.5 Mw 68 Db SNDR 80 Ms/s 2<formula Formulatype="inline"> <tex Notation="TeX">$\times$</tex></formula> Interleaved Pipelined SAR ADC in 28 Nm CMOS

16.5 A 13b 0.005mm<sup>2</sup> 40MS/s SAR ADC with kT/C Noise Cancellation

A 14bit 500MS/s 85.62dBc SFDR 66.29dB SNDR SHA-less pipelined ADC with a stable and high-linearity input buffer and aperture-error calibration in 40nm CMOS

16.5 A 13b 0.005mm(2) 40ms/S Sar Adc With Kt/C Noise Cancellation

A 13-Bit 0.005-Mm2 40-Ms/s SAR ADC with Kt/c Noise Cancellation

A 12-Bit 2.32gs/s Pipelined/sar Hybrid ADC with a High-Linearity Input Buffer.

A 0.004-Mm2 200-Ms/s Pipelined SAR ADC with Kt/c Noise Cancellation and Robust Ring-Amp

A 93.6Db-Sndr 5Khz-Bw Fully Dynamic Hybrid CT-DT Noise Shaping SAR ADC

17.5 A 10mw 10-ENOB 1gs/s Ring-Amp-Based Pipelined TI-SAR ADC with Split MDAC and Switched Reference Decoupling Capacitor

A 10b 250ms/s SAR ADC with Speed-Enhanced SAR Logic and Free Time More Than a Half of Sampling Period

9.4 A 182.3dB FoM<inf>s</inf> 50MS/s Pipelined-SAR ADC using Cascode Capacitively Degenerated Dynamic Amplifier and MSB Pre-Conversion Technique

A Capacitive Dac with Custom 3-D 1-Ff Mom Unit Capacitors Optimized for Fast-Settling Routing in High Speed Sar Adcs

A Low-Power 12-Bit 2gs/S Time-Interleaved Pipelined-Sar Adc In 28nm Cmos Process

A 12-bit 100-MSps pipelined-SAR ADC with a time-interleaved second-stage

14-Bit 100 Ms/S 121 Mw Pipelined Adc

A 93.6-Db SNDR Fully Dynamic CT–DT Noise-Shaping SAR ADC with Closed-Loop Capacitively Coupled Two-Stage FIA