Abstract:Mullite (Al6Si2O13) and ytterbium disilicate (Yb2Si2O7) powders were synthesized by the solvent gel (sol-gel) method. To improve the oxidation resistance of Cf/SiC composites at high temperatures, a novel tri-layer Yb2Si2O7/Al6Si2O13/SiC environment barrier coatings (EBCs) was deposited on the surface of Cf/SiC composites by chemical vapor deposition (CVD) and air spray sol-gel methods. Results show that Yb2Si2O7/Al6Si2O13/SiC coating lost its ability to protect Cf/SiC composites in the air environment at 1773 K due to the Yb2Si2O7 particles in Yb2Si2O7 top coating diffused into the Al6Si2O13 middle coating, which eventually form a eutectic interface with the extension of oxidation time. However, Yb2Si2O7/Al6Si2O13/SiC coating can efficiently prevent the oxidation of Cf/SiC composites at 1673 K for 150 h with a weight loss of 2.69 × 10−3 g·cm−2. The growth of grains and the disappearance of micro-holes in Al6Si2O13 and Yb2Si2O7 coatings deposited by air spray sol-gel method led to the excellent oxidation resistance of Yb2Si2O7/Al6Si2O13/SiC coating.

Microstructural Regulation, Oxidation Resistance and Mechanical Properties of Cf/SiC/SiHfBOC Composites Prepared by Chemical Vapor Infiltration with Precursor Infiltration Pyrolysis

Microstructure and oxidation behavior of SiOC coatings on C/C composites co-deposited with HMDS and TEOS by using CVD process

Wet oxidation behavior of C/SiC–SiHf(B)CN composites at high temperature

Oxidation behavior of 3D SiCf/SiBCN composites at 800–1200 °C

Comparison of Oxidation Behaviors of 3D C/PyC/SiC and SiC/PyC/SiC Composites in an O2-Ar Atmosphere

Siliconization elimination for SiC coated C/C composites by a pyrolytic carbon coating and the consequent improvement of the mechanical property and oxidation resistances

Oxidation resistance of SiCf/SiC composites with a PyC/SiC multilayer interface at 500 °C to 1100°C

Long-term oxidation resistant SiC/SiC-SiHfBCN composites: A promising thermo-structural material aims for hypersonic roundtrip

Effects of pyrolysis temperatures on the oxidation behavior of PIP-processed SiCf/SiC composites

Mechanical properties and strengthening mechanism of SiCf/SiC mini-composites modified by SiC nanowires

Ablation behavior of 3D PyC-Cf/SiHfBOC Composites under an oxyacetylene torch environment above 2000 °C

In-situ SiC nanowires reinforced SiC-based multicomponent ceramic coating for protecting SiOC/CF composites

Investigation on the oxidation and ablation behaviors of HfB2-SiC-Si/SiC-Si coatings for carbon/carbon composites

Oxidation Kinetics and Its Impact on the Strength of Carbon Short Fiber Reinforced C/SiC Ceramics

Microstructural evolution and oxide layer structure of Csf/SiBCN composites during oxidation at 1500 °C

Experimental and first-principles simulation study on oxidation behavior at 1700 °C of Lu2O3–SiC-HfB2 ternary coating for SiC coated carbon/carbon composites

HfB 2 -SiC ceramics fabricated by reactive melt infiltration and its long-term oxidation behavior at 1650°C

Oxidation Behavior of Carbon Fibers in Ceramizable Phenolic Resin Matrix Composites at Elevated Temperatures

Characterization of hot-pressed short carbon fiber reinforced ZrB2–SiC ultra-high temperature ceramic composites

Effect of difference in microstructure of rare refractory metal silicate doping matrix on oxidation behavior and mechanism of C/SiC composites

Oxidation properties of tri-layer ytterbium-disilicate/mullite/silicon-carbide environment barrier coatings for Cf/SiC composites