Abstract:Recently, carbon nanotube field-effect transistors (CNTFETs) have garnered significant attention from VLSI engineers due to their exceptional electrical properties. This paper proposes a novel high-speed, low-power eight-transistor (8 T) static random-access memory (SRAM) cell based on 32-nm CNTFET technology. The SRAM cell was simulated using the HSPICE tool with a V DD of 0.9 V. The high-speed and low-power characteristics of the SRAM design are attributed to the high subthreshold slope and high carrier mobility of metal-oxide-semiconductor field-effect transistor (MOSFET)-like CNTFETs utilized in the simulations. The implementation of dual threshold transistors, coupled with a transmission gate for bitline access, contributes to the enhanced performance. Key performance metrics such as noise margins, power consumption, delay, and SRAM electrical quality metric (SEQM) of the proposed SRAM have been evaluated and compared with existing CNTFET-based SRAM designs. The proposed cell demonstrates reductions of 73.73%, 43.18%, and 58.70% in read power, write power, and hold power, respectively, compared to the lowest respective power values of other examined SRAM designs. The proposed SRAM ranks second, third, and second in write static noise margin (WSNM), hold static noise margin (HSNM), and read static noise margin (RSNM), respectively, among other designs. Additionally, the proposed SRAM exhibits the least sensitivity to parametric variations compared to other designs. The SEQM, which provides a comprehensive assessment of access times, noise margins, and power usage for the SRAM cell, has been calculated. The SEQM of the proposed SRAM is 10.6, 1.89, 13.15, and 1.82 times higher than that of C6T, BLP8T, Mani's 10 T, and LP8T, respectively.

High Noise Margin 12T Subthreshold SRAM Cell with Enhanced Read Speed and Eliminated Half-Selected Problem

A Design of Subthreshold SRAM Cell Based on RSCE and RNCE.

Optimization of SRAM cell by utilizing reverse short channel and reverse narrow channel effect

Near-threshold non-precharged SRAM

A Half-Select Disturb-Free 11T SRAM Cell with Built-In Write/Read-Assist Scheme for Ultralow-Voltage Operations

Hybrid MOSFET-TFET 11T SRAM Cell with High Write Speed and Free Half-Selected Disturbance

Low Voltage SRAM Cell Suitable for Bit-Interleaved Structure

A 320 Mv, 6 Kb Subthreshold 10T SRAM Employing Voltage Lowering Techniques

Design analysis of a low-power, high-speed 8 T SRAM cell using dual-threshold CNTFETs

A Single Bitline Highly Stable, Low Power With High Speed Half-Select Disturb Free 11T SRAM Cell

An Improved Data-aware Structure Sub-threshold SRAM

A Reliable Low Standby Power 10T SRAM Cell With Expanded Static Noise Margins

A 0.33 V 2.5 Μw Cross-Point Data-Aware Write Structure, Read-Half-select Disturb-Free Sub-Threshold SRAM in 130 Nm CMOS

A Leakage Current Suppression Technique for Cascade SRAM Array in 55 Nm CMOS Technology

Low-power and robust ternary SRAM cell with improved noise margin in CNTFET technology

A Pmos Read-Port 8t Sram Cell with Optimized Leakage Power and Enhanced Performance

A CNTFET Based Stable, Single-Ended 7T SRAM cell With Improved Write Operation

Performance Analysis of 6T and 9T SRAM

Highly Area-Efficient Low-Power SRAM Cell with 2 Transistors and 2 Resistors

An Ultra-Low Leakage Bitcell Structure with the Feedforward Self-Suppression Scheme for Near-Threshold SRAM.

-Memory Computing Based Reliable and High Speed Schmitt trigger 10T SRAM cell design