Abstract:Recently, carbon nanotube field-effect transistors (CNTFETs) have garnered significant attention from VLSI engineers due to their exceptional electrical properties. This paper proposes a novel high-speed, low-power eight-transistor (8 T) static random-access memory (SRAM) cell based on 32-nm CNTFET technology. The SRAM cell was simulated using the HSPICE tool with a V DD of 0.9 V. The high-speed and low-power characteristics of the SRAM design are attributed to the high subthreshold slope and high carrier mobility of metal-oxide-semiconductor field-effect transistor (MOSFET)-like CNTFETs utilized in the simulations. The implementation of dual threshold transistors, coupled with a transmission gate for bitline access, contributes to the enhanced performance. Key performance metrics such as noise margins, power consumption, delay, and SRAM electrical quality metric (SEQM) of the proposed SRAM have been evaluated and compared with existing CNTFET-based SRAM designs. The proposed cell demonstrates reductions of 73.73%, 43.18%, and 58.70% in read power, write power, and hold power, respectively, compared to the lowest respective power values of other examined SRAM designs. The proposed SRAM ranks second, third, and second in write static noise margin (WSNM), hold static noise margin (HSNM), and read static noise margin (RSNM), respectively, among other designs. Additionally, the proposed SRAM exhibits the least sensitivity to parametric variations compared to other designs. The SEQM, which provides a comprehensive assessment of access times, noise margins, and power usage for the SRAM cell, has been calculated. The SEQM of the proposed SRAM is 10.6, 1.89, 13.15, and 1.82 times higher than that of C6T, BLP8T, Mani's 10 T, and LP8T, respectively.

A Design of Subthreshold SRAM Cell Based on RSCE and RNCE.

Optimization of SRAM cell by utilizing reverse short channel and reverse narrow channel effect

High Noise Margin 12T Subthreshold SRAM Cell with Enhanced Read Speed and Eliminated Half-Selected Problem

A Subthreshold 10T SRAM Cell with Enhanced Read and Write Operations

A 320 Mv, 6 Kb Subthreshold 10T SRAM Employing Voltage Lowering Techniques

A Robust High Density 7T Subthreshold SRAM Bitcell with Partial Dynamic Threshold Voltage Connection Scheme

A Circuit for Robustness Enhancement of the Subthreshold SRAM Bitcell in 65nm Technology

Low-leakage Robust SRAM Cell Design for Sub-100Nm Technologies

A 200 Mv Low Leakage Current Subthreshold SRAM Bitcell in a 130 Nm CMOS Process

Design analysis of a low-power, high-speed 8 T SRAM cell using dual-threshold CNTFETs

An ultra-low-supply-voltage ultra-low-power subthreshold SRAM bitcell design

Physical Modeling of Bitcell Stability in Subthreshold SRAMs for Leakage-Area Optimization under PVT Variations.

An Ultra-Low-power 1 Kb Sub-Threshold SRAM in the 180 Nm CMOS Process

Design of RTD-Based TSRAM

Novel 15T SRAM Cell for Low Voltage High Reliability Application

A Leakage Current Suppression Technique for Cascade SRAM Array in 55 Nm CMOS Technology

Novel 8T Bit-cell with High RSNM for Sub-threshold SRAM

A Half-Select Disturb-Free 11T SRAM Cell with Built-In Write/Read-Assist Scheme for Ultralow-Voltage Operations

Read/write Margin Enhanced 10T SRAM for Low Voltage Application

Low Voltage SRAM Cell Suitable for Bit-Interleaved Structure

An Ultra-Low Leakage Bitcell Structure with the Feedforward Self-Suppression Scheme for Near-Threshold SRAM.