Abstract:For the application of high intensity continuous wave（CW） proton beam acceleration, a new superconducting accelerating structure for extremely low β protons working in TE210 mode has been proposed at Peking University. The cavity consists of eight electrodes and eight accelerating gaps. The cavity’s longitudinal length is368.5 mm, and its transverse dimension is 416 mm. The RF frequency is 162.5 MHz, and the designed proton input energy is 200 ke V. A peak field optimization has been performed for the lower surface field. The accelerating gaps are adjusted by phase sweeping based on KONUS beam dynamics. The first four gaps are operated at negative synchronous RF phase to provide longitudinal focusing. The subsequent gaps are 0?sections which can minimize the transverse defocusing effect. Solenoids are placed outside the cavity to provide transverse focusing. Numerical calculation shows that the transverse defocusing of the KONUS phase is about three times smaller than that of the conventional negative synchronous RF phase. The beam dynamics of a 10 m A CW proton beam is simulated by the Trace Win code. The simulation results show that the beam’s transverse size is under effective control, while the increase in the longitudinal direction is slightly large. Both the Trace Win simulation and the numerical calculation show that the cavity has a relatively high effective accelerating gradient of 2.6 MV/m. On the whole, our results show that this new accelerating structure may be a possible candidate for superconducting operation at such a low energy range.

Design Of A Beta=0.45, F=350 Mhz Spoke Cavity

Design of a ββ = 0.45, f = 350 MHz Spoke Cavity

Study On High Order Modes Of A Beta=0.45, F=350mhz Spoke Cavity

Design of a 450 MHz Β = 0.2 Single Spoke Cavity at PKU

Design of a 325MHz Beta=0.12 superconducting single spoke cavity for China-ADS

A Preliminary Quadrupole Asymmetry Study of a Β=0.12 Superconducting Single Spoke Cavity

Design study on very low Beta spoke cavity for China-ADS

Design study of a beta=0.09 high current superconducting half wave resonator

Design of a 324 MHz Double-Spoke Cavity at CSNS

Electromagnetic Design and Beam Dynamics Simulation of a New Superconducting Accelerating Structure for Extremely Low Β Protons

DESIGN OF THE PEFP LOW BETA CRYOMODULE

MECHANICAL ANALYSIS AND DESIGN OF THE PEFP LOW BETA CAVITY

Study on high order modes in a beta=0.09 srf hwr cavity for 100 ma proton acceleration

High Order Modes in Low Beta SRF Half Wave Resonator Cavity for 100 Ma Proton Acceleration

Design, fabrication and test of a taper-type half-wave superconducting cavity with the optimal beta of 0.15 at IMP

Mechanical Analysis of Lowβ162.5 MHz Taper HWR Cavity

Mechanical design and analysis for a low beta squeezed half-wave resonator

Electromagnetic Design and Optimization of a Superconducting Quarter Wave Resonator

Mechanical Analysis of a Β=0.09 162.5mhz Taper HWR Cavity

STUDY ON A LOW BETA HIGH CURRENT TAPER TYPE SUPERCONDUCTING HALF WAVE RESONATOR FOR BISOL*

BEAM ENERGY LOSS IN A BETA = 0 . 09 SRF HWR CAVITY FOR 100 mA PROTON ACCELERATION