Abstract:The storage ring of the high energy photon source will be driven by five 166.6 MHz β = 1 quarter-wave superconducting cavities operating at 4 K. A higher-order-mode-damped superconducting cavity was designed with excellent rf and mechanical properties based on the successful development of the proof-of-principle cavity. The mechanical design of the dressed cavity was focused on addressing stress safety throughout the processes, tunability, frequency detuning due to pressure fluctuation, and Lorentz force, among other factors. A new liquid helium vessel was designed along with a comprehensive stiffening scheme to mitigate the surging peak stress on the cavity resulting from the significantly unequal beam pipe size. In the first batch, three cavities were manufactured, and surface preparations were carefully conducted to eliminate defects and etching traces while ensuring cleanliness. The cavity’s Q0 at the design voltage of 1.5 MV reached 3.8 × 109 at 4 K, comfortably surpassing the design goal. Field emission onset was not observed during the entire test up to a peak electric field of 60 MV/m, thanks to the optimized processing procedures. Subsequently, one cavity was welded with the newly designed helium vessel and vertically tested at 2 K, achieving an rf performance comparable to the bare cavities, demonstrating the success of the jacketed cavity. This paper presents the design, fabrication, surface preparation, and cryogenic tests of the first higher-order-mode-damped 166.6 MHz β = 1 superconducting cavity.

Mechanical Analysis of a Β=0.09 162.5mhz Taper HWR Cavity

Mechanical Analysis of Lowβ162.5 MHz Taper HWR Cavity

Mechanical design and analysis for a low beta squeezed half-wave resonator

Design study of a beta=0.09 high current superconducting half wave resonator

PRELIMINARY DESIGN OF 325 MHZ HALF-WAVE RESONATOR*

Study on the frequency tuning of half-wave resonator at IMP

Design, fabrication and test of a taper-type half-wave superconducting cavity with the optimal beta of 0.15 at IMP

High Order Modes in Low Beta SRF Half Wave Resonator Cavity for 100 Ma Proton Acceleration

Study on high order modes in a beta=0.09 srf hwr cavity for 100 ma proton acceleration

Design and Test of the Helium Pneumatic Tuner Based on 162.5 MHz Superconducting Cavity

Development of a 166.6 MHz β = 1 higher-order-mode-damped superconducting cavity

Electromagnetic Design and Optimization of a Superconducting Quarter Wave Resonator

STUDY ON A LOW BETA HIGH CURRENT TAPER TYPE SUPERCONDUCTING HALF WAVE RESONATOR FOR BISOL*

Design of a ββ = 0.45, f = 350 MHz Spoke Cavity

Preliminary Research of HOM for 100mhz Superconducting Cavity in the Pre-research Project of HALS

Design of a 450 MHz Β = 0.2 Single Spoke Cavity at PKU

The effect of nitrogen infusion on a 162.5 MHz low beta superconducting HWR cavity

A Preliminary Quadrupole Asymmetry Study of a Β=0.12 Superconducting Single Spoke Cavity

BEAM ENERGY LOSS IN A BETA = 0 . 09 SRF HWR CAVITY FOR 100 mA PROTON ACCELERATION

Design Of A Beta=0.45, F=350 Mhz Spoke Cavity

Design of a 324 MHz Double-Spoke Cavity at CSNS