Abstract:S-band high-gradient accelerating structures were proposed to accelerate protons from 30 to 230 MeV for a compact proton therapy linac in Institute of Modern Physics. A backward traveling wave structure and a single-periodic magnetically coupled standing wave structure were designed, and differences between these two structures were analyzed to select a more suitable one for the proton therapy linac. In this paper, a novel single-periodic magnetically coupled standing-wave accelerating structure was studied, with an optimized nose cone that related to a smaller peak surface electric field and higher shunt impedance, with the reduced number of coupling holes and mechanical von Mises stress thus making it possible for higher duty factor and longer rf pulse operation, also with larger coupling holes and improved cell-to-cell coupling thus making this structure suitable for operating in π mode. An 11-cell high-power prototype for β=0.26 particles was developed with an active length of 143 mm. This prototype cavity is supposed to operate at an accelerating gradient of 30 MV/m with 0.1% duty factor, corresponding to a maximum surface electric field of 105 MV/m and a peak rf power of 3.43 MW. Cavity design, optimization, manufacture, rf measurement, and high-power test will be discussed in this paper. https://doi.org/10.1103/PhysRevAccelBeams.27.092002 Published by the American Physical Society under the terms of the Creative Commons Attribution 4.0 International license. Further distribution of this work must maintain attribution to the author(s) and the published article's title, journal citation, and DOI. Published by the American Physical Society

Electromagnetic Design and Beam Dynamics Simulation of a New Superconducting Accelerating Structure for Extremely Low Β Protons

S-band high-gradient low single-periodic magnetically coupled standing-wave accelerating structure for a proton therapy linac

Design of a 10 MeV normal conducting CW proton linac based on equidistant multi-gap CH cavities

High Order Modes in Low Beta SRF Half Wave Resonator Cavity for 100 Ma Proton Acceleration

Design study of a beta=0.09 high current superconducting half wave resonator

Study on high order modes in a beta=0.09 srf hwr cavity for 100 ma proton acceleration

Electromagnetic Design and Optimization of a Superconducting Quarter Wave Resonator

Design of a 162.5 MHz Superconducting Radio-Frequency Quadrupole for High-Intensity Proton Acceleration

Beamline Analysis for a Laser-Driven Proton Therapy Accelerator Using Superconducting Bends

Design of a ββ = 0.45, f = 350 MHz Spoke Cavity

Design and beam dynamics simulation of an 8 MeV compact accelerator-driven neutron source

Design, fabrication, and cold test of an S-band high-gradient accelerating structure for compact proton therapy facility

Achromatic Beamline Design For A Laser-Driven Proton Therapy Accelerator

IH-DTL Design with Modified KONUS Beam Dynamics for a Synchrotron-Based Proton Therapy System

A Preliminary Quadrupole Asymmetry Study of a Β=0.12 Superconducting Single Spoke Cavity

Beam dynamics design and irradiation experiment of beam loss for a CW 100-mA proton RFQ

Beam Dynamics of a 325 MHz IH-DTL with KONUS

Design, fabrication and test of a taper-type half-wave superconducting cavity with the optimal beta of 0.15 at IMP

Design and Optimization of Beam Optics for a Superconducting Gantry Applied to Proton Therapy

Detuned-Structure-Based Beam-Driven Accelerator

Physical Design and Multi-Physics Analysis of a 200 MHz Continuous Wave Radio Frequency Quadrupole Accelerator for a Proton Accelerator Facility