Abstract:The China Spallation Neutron Source upgrade project (CSNS-II) has completed the preliminary design report and is expected to start in the fall of 2023. It plans to add two types of superconducting cavities: the 324-MHz double spoke superconducting cavity and the 648-MHz elliptical superconducting cavity in the linac section of the accelerator to upgrade the beam power from 100 to 500 kW, requiring more than 40 new fundamental power couplers (FPCs). These couplers will operate at pulse mode with a peak power ranging from 100 to 380 kW. To master the entire R&D process of the FPC for superconducting cavities, meanwhile, provide the horizontal test condition for various superconducting cavities research, a pair of 324-MHz power couplers for the double spoke superconducting cavity are developed. This coupler is a coaxial structure with a disk-warm ceramic window, and its characteristic impedance is 50 omega. Multiphysics design is performed to ensure that the coupler meets the actual requirements. Structures of the coupler are optimized to realize a clean assembly with the cavity in Class 10 clean room and avoid window failure due to the bombardment of electrons generated by possible cavity field emission. We have successfully fabricated two FPCs and high power conditioned them on the test bench at room temperature. The test results show that FPCs can transmit a peak radio frequency (rf) power of 2 MW with a duty factor of 1.625% in traveling wave mode and an rf power of 500 kW with a duty factor of 3% in standing wave mode with arbitrary reflection wave phase. It meets the requirement of spoke cavities for CSNS-II-200 kW maximum power with a duty factor of 3%. Multipacting (MP) zones found during the high-power conditioning agree reasonably well with those predicted by simulations.

Design of a 325MHz Beta=0.12 superconducting single spoke cavity for China-ADS

Design study on very low Beta spoke cavity for China-ADS

Design Of A Beta=0.45, F=350 Mhz Spoke Cavity

Design of a 450 MHz Β = 0.2 Single Spoke Cavity at PKU

Design of a ββ = 0.45, f = 350 MHz Spoke Cavity

Design, fabrication and test of a taper-type half-wave superconducting cavity with the optimal beta of 0.15 at IMP

A Preliminary Quadrupole Asymmetry Study of a Β=0.12 Superconducting Single Spoke Cavity

DESIGN STUDIES OF THE C-ADS MAIN LINAC WITH ONLY SPOKE CAVITIES *

Development of Power Coupler for Superconducting Spoke Cavities for China ADS Proton Linac

Srf cavities for ads project in china *

650 MHz Elliptical Superconducting RF Cavities for CiADS Project

Study On High Order Modes Of A Beta=0.45, F=350mhz Spoke Cavity

Design of a 324 MHz Double-Spoke Cavity at CSNS

Design and thermal performance of spoke cavity prototype cryomodule of the Chinese Accelerator Driven Sub-critical system Injector-I

Design study of a beta=0.09 high current superconducting half wave resonator

Radio frequency design and multipacting study of superconducting elliptical cavity for CSNS-II linac

Development of a 166.6 MHz β = 1 higher-order-mode-damped superconducting cavity

Development of Fundamental Power Coupler for C-ADS Superconducting Elliptical Cavities

Great progress in developing 500 MHz single cell superconducting cavity in China

STUDY ON A LOW BETA HIGH CURRENT TAPER TYPE SUPERCONDUCTING HALF WAVE RESONATOR FOR BISOL*

Development of the Fundamental Power Coupler for 324 MHz Superconducting Cavities