Abstract:The higher efficiency of superconducting radio-frequency (SRF) cavities compared to normal-conducting ones enables the development of high-energy continuous-wave linear accelerators (linacs). Recent progress in the development of high-quality Nb$_3$Sn film coatings along with the availability of cryocoolers with high cooling capacity at 4 K makes it feasible to operate SRF cavities cooled by thermal conduction at relevant accelerating gradients for use in accelerators. A possible use of conduction-cooled SRF linacs is for environmental applications, requiring electron beams with energy of $1 - 10$ MeV and 1 MW of power. We have designed a 915 MHz SRF linac for such an application and developed a prototype single-cell cavity to prove the proposed design by operating it with cryocoolers at the accelerating gradient required for 1 MeV energy gain. The cavity has a $\sim 3$ $\mu$m thick Nb$_3$Sn film on the inner surface, deposited on a $\sim4$ mm thick bulk Nb substrate and a bulk $\sim7$ mm thick Cu outer shell with three Cu attachment tabs. The cavity was tested up to a peak surface magnetic field of 53 mT in liquid He at 4.3 K. A horizontal test cryostat was designed and built to test the cavity cooled with three Gifford-McMahon cryocoolers. The rf tests of the conduction-cooled cavity, performed at General Atomics, achieved a peak surface magnetic field of 50 mT and stable operation was possible with up to 18.5 W of rf heat load. The peak frequency shift due to microphonics was 23 Hz. These results represent the highest peak surface magnetic field achieved in a conduction-cooled SRF cavity to date and meet the requirements for a 1 MeV energy gain.

The Design of A Five-Cell High-Current Superconducting Cavity

HIGH CURRENT SUPERCONDUCTING CAVITY STUDY AND DESIGN

Studies of LL-type 500MHz 5-cell superconducting cavity at SINAP

A Three-Cell Superconducting Deflecting Cavity Design for the ALS at LBNL

Development of a prototype superconducting radio-frequency cavity for conduction-cooled accelerators

Design of a 10 MeV normal conducting CW proton linac based on equidistant multi-gap CH cavities

Electromagnetic Design and Optimization of a Superconducting Quarter Wave Resonator

Study on SRF Multicell Accelerating Cavity for Linear Collider and Trapped Modes

RF Design of 650-Mhz 2-Cell Cavity for CEPC

Design study of a beta=0.09 high current superconducting half wave resonator

Fabrication and cold test of prototype of spatially periodic radio frequency quadrupole focusing linac

Superconducting RF Deflecting Cavity Design and Prototype for Short X-ray Pulse Generation

Improving the Stability of Pulse Superconducting Radio Frequency Cavities by the Construction of an Al-Nb Double Layer Structure

Beam physics design of a superconducting linac

Design of a 162.5 MHz Superconducting Radio-Frequency Quadrupole for High-Intensity Proton Acceleration

New Results of Development on High Efficiency High Gradient Superconducting RF Cavities

Multi-metallic conduction cooled superconducting radio-frequency cavity with high thermal stability

Design of a CW high charge state heavy ion RFQ for SSC-LINAC

3.5-cell large grain niobium superconducting cavity for a dc superconducting rf photoinjector

Study On Homs In 1+1/2 Cell Superconducting Cavity

Design and Cold Measurements of a Coupled RFQ-SFRFQ Cavity