Abstract:The higher efficiency of superconducting radio-frequency (SRF) cavities compared to normal-conducting ones enables the development of high-energy continuous-wave linear accelerators (linacs). Recent progress in the development of high-quality Nb$_3$Sn film coatings along with the availability of cryocoolers with high cooling capacity at 4 K makes it feasible to operate SRF cavities cooled by thermal conduction at relevant accelerating gradients for use in accelerators. A possible use of conduction-cooled SRF linacs is for environmental applications, requiring electron beams with energy of $1 - 10$ MeV and 1 MW of power. We have designed a 915 MHz SRF linac for such an application and developed a prototype single-cell cavity to prove the proposed design by operating it with cryocoolers at the accelerating gradient required for 1 MeV energy gain. The cavity has a $\sim 3$ $\mu$m thick Nb$_3$Sn film on the inner surface, deposited on a $\sim4$ mm thick bulk Nb substrate and a bulk $\sim7$ mm thick Cu outer shell with three Cu attachment tabs. The cavity was tested up to a peak surface magnetic field of 53 mT in liquid He at 4.3 K. A horizontal test cryostat was designed and built to test the cavity cooled with three Gifford-McMahon cryocoolers. The rf tests of the conduction-cooled cavity, performed at General Atomics, achieved a peak surface magnetic field of 50 mT and stable operation was possible with up to 18.5 W of rf heat load. The peak frequency shift due to microphonics was 23 Hz. These results represent the highest peak surface magnetic field achieved in a conduction-cooled SRF cavity to date and meet the requirements for a 1 MeV energy gain.

Multi-metallic conduction cooled superconducting radio-frequency cavity with high thermal stability

Development of a prototype superconducting radio-frequency cavity for conduction-cooled accelerators

Stable CW Operation of Nb$_3$Sn SRF Cavity at 10 MV/m using Conduction Cooling

Continuous Wave Mode Test of Conduction-Cooled Nb3Sn Radio Frequency Superconducting Cavities at Peking University

Development of a cryocooler conduction-cooled 650 MHz SRF cavity operating at ~10 MV/m cw accelerating gradient

First demonstration of a cryocooler conduction cooled superconducting radiofrequency cavity operating at practical cw accelerating gradients

Demonstration of CW accelerating gradients on a cryogen-free, cryocooler conduction-cooled SRF cavity

Superconducting niobium cavities of improved thermal conductivity

Improving the Stability of Pulse Superconducting Radio Frequency Cavities by the Construction of an Al-Nb Double Layer Structure

805 MHz and 201 MHz RF Cavity Development for MUCOOL

Stable Acceleration of a LHe-Free Nb3Sn demo SRF e-linac Based on Conduction Cooling

New Results of Development on High Efficiency High Gradient Superconducting RF Cavities

A Path to Higher Q0 with Large Grain Niobium Cavities

Low-Temperature Baking Effect of the Radio-Frequency Nb<sub>3</sub>Sn Thin Film Superconducting Cavity

Development and characterization of Nb3Sn/Al2O3 superconducting multilayers for particle accelerators

Simulation of conduction cooling of a 650MHz 5-cell cavity

Semi-Dry Cooling Solutions for Future Superconducting Accelerator Structures

Temperature Mapping on a Niobium-Coated Copper Superconducting Radio-Frequency Cavity

MgB$_{2}$ Coating by HPCVD for 1.3-GHz Superconducting RF Cavities

Development of a 166.6 MHz β = 1 higher-order-mode-damped superconducting cavity

Efficient expulsion of magnetic flux in superconducting RF cavities for high $Q_0$ applications