Abstract:The higher efficiency of superconducting radio-frequency (SRF) cavities compared to normal-conducting ones enables the development of high-energy continuous-wave linear accelerators (linacs). Recent progress in the development of high-quality Nb$_3$Sn film coatings along with the availability of cryocoolers with high cooling capacity at 4 K makes it feasible to operate SRF cavities cooled by thermal conduction at relevant accelerating gradients for use in accelerators. A possible use of conduction-cooled SRF linacs is for environmental applications, requiring electron beams with energy of $1 - 10$ MeV and 1 MW of power. We have designed a 915 MHz SRF linac for such an application and developed a prototype single-cell cavity to prove the proposed design by operating it with cryocoolers at the accelerating gradient required for 1 MeV energy gain. The cavity has a $\sim 3$ $\mu$m thick Nb$_3$Sn film on the inner surface, deposited on a $\sim4$ mm thick bulk Nb substrate and a bulk $\sim7$ mm thick Cu outer shell with three Cu attachment tabs. The cavity was tested up to a peak surface magnetic field of 53 mT in liquid He at 4.3 K. A horizontal test cryostat was designed and built to test the cavity cooled with three Gifford-McMahon cryocoolers. The rf tests of the conduction-cooled cavity, performed at General Atomics, achieved a peak surface magnetic field of 50 mT and stable operation was possible with up to 18.5 W of rf heat load. The peak frequency shift due to microphonics was 23 Hz. These results represent the highest peak surface magnetic field achieved in a conduction-cooled SRF cavity to date and meet the requirements for a 1 MeV energy gain.

Stable Acceleration of a LHe-Free Nb3Sn demo SRF e-linac Based on Conduction Cooling

Stable Acceleration of a LHe-Free Nb 3 Sn demo SRF e-linac

Development of a prototype superconducting radio-frequency cavity for conduction-cooled accelerators

Stable CW Operation of Nb$_3$Sn SRF Cavity at 10 MV/m using Conduction Cooling

Continuous Wave Mode Test of Conduction-Cooled Nb3Sn Radio Frequency Superconducting Cavities at Peking University

First demonstration of a cryocooler conduction cooled superconducting radiofrequency cavity operating at practical cw accelerating gradients

Demonstration of CW accelerating gradients on a cryogen-free, cryocooler conduction-cooled SRF cavity

Development of a cryocooler conduction-cooled 650 MHz SRF cavity operating at ~10 MV/m cw accelerating gradient

Multi-metallic conduction cooled superconducting radio-frequency cavity with high thermal stability

Low-Temperature Baking Effect of the Radio-Frequency Nb<sub>3</sub>Sn Thin Film Superconducting Cavity

Smooth, homogeneous, high-purity Nb3Sn superconducting RF resonant cavity by seed-free electrochemical synthesis

CW RFQ design and investigation for multi-charge-state acceleration of radioactive beams from BISOL

Fabrication and cold test of prototype of spatially periodic radio frequency quadrupole focusing linac

Design and Simulation of 500 MHz Single Cell Superconducting RF Cavity for SILF

Experimental demonstration of particle acceleration with normal conducting accelerating structure at cryogenic temperature

Improving the Stability of Pulse Superconducting Radio Frequency Cavities by the Construction of an Al-Nb Double Layer Structure

Development and characterization of Nb3Sn/Al2O3 superconducting multilayers for particle accelerators

Understanding and optimization of the coating process of the radio-frequency Nb 3 Sn thin film superconducting cavities using tin vapor diffusion method

Development of a 1/2-length prototype high field Nb3Sn magnet for the 4th generation ECR ion source

Great progress in developing 500 MHz single cell superconducting cavity in China

New Results of Development on High Efficiency High Gradient Superconducting RF Cavities