Abstract:With the rapid development of the quantum information technology and deep space exploration. there is an increasing demand for cryocoolers featuring high reliability, long operation lifetime, small scale, lightweight and high cooling efficiency, while the hybrid cooling cycle formed by the multi-stage high frequency pulse tube and the Joule-Thomson (JT) is an important approach to the problem. To date, over the world, the temperatures below 2 K with the above cycle have all been achieved by the use of He-4 in the pulse tube subsystem while He-3 in the JT subsystem. However, He-3 is rare and expensive, which is the key bottleneck of hindering the wide application of the cooling cycle. This paper makes theoretical and experimental investigations on the hybrid cooling cycle formed by the four-stage high frequency pulse tube and the JT, in which the pulse tube subsystem acts as the precooler while the JT subsystem as the final cooling stage. The distinctive feature of the hybrid cooling cycle is that in the entire system the He-4 is the only working medium. The key difficulty and feasibility of achieving temperatures below 2 K with the above hybrid system have been analyzed. Based on the suction pressure of the first stage compressor and counter-flow heat exchanger (CHEX) pressure drop on the low pressure side, it was predicted that with the charge pressure of 40 kPa, the suction pressure and the gross pressure drop can reach 1.1 kPa and 438.6 Pa, respectively, and thus a saturated vapor pressure of 1.54 kPa is obtained. which makes it feasible to achieve a no-load temperature of 1.78 K. Meanwhile, we theoretically analyzed the effect of the Kapitza conductance for a small interfacial temperature difference on the heat transfer in the cold head evaporator with He II, and then achieved the limiting condition of the parameter improvement for the JT cycle. The no-load temperature of the developed hybrid cryocooler dropped from 300 K to 1.8 K in 16.5 hours, and the temperature fluctuation was no higher than +/- 6 mK during the 360 hours of continuous operation time, which validates the above theoretical analyses and the satisfactory temperature stability of the superfluid helium medium. In order to comprehensively and objectively evaluate the performance of the developed hybrid cryocooler in practical applications, the experiment of coupling it with the actual superconducting nanowire single-photon detector (SNSPD) was conducted subsequently, in which the SNSPD performance was evaluated by measuring the system detection efficiency (SDE) and dark count rate (DCR). The results indicate that the developed cryocooler can provide effective cooling at 1.84 K and the favourable electrical environment, which ensures the SNSPD to work stably and reliably. It is the first time that an operating temperature below 2 K was reported with the similar hybrid cooling cycle using He-4 as the only working medium. especially when an actual SNSPD was coupled. This breakthrough will not only make it feasible for the future space application of the SNSPD, but also pave the way to break the bottleneck of its wide application in a variety of fields.

First demonstration of a cryocooler conduction cooled superconducting radiofrequency cavity operating at practical cw accelerating gradients

Demonstration of CW accelerating gradients on a cryogen-free, cryocooler conduction-cooled SRF cavity

Development of a cryocooler conduction-cooled 650 MHz SRF cavity operating at ~10 MV/m cw accelerating gradient

Stable CW Operation of Nb$_3$Sn SRF Cavity at 10 MV/m using Conduction Cooling

Development of a prototype superconducting radio-frequency cavity for conduction-cooled accelerators

Multi-metallic conduction cooled superconducting radio-frequency cavity with high thermal stability

Stable Acceleration of a LHe-Free Nb3Sn demo SRF e-linac Based on Conduction Cooling

Semi-Dry Cooling Solutions for Future Superconducting Accelerator Structures

Simulation of conduction cooling of a 650MHz 5-cell cavity

Experimental demonstration of particle acceleration with normal conducting accelerating structure at cryogenic temperature

New Results of Development on High Efficiency High Gradient Superconducting RF Cavities

Continuous Wave Mode Test of Conduction-Cooled Nb3Sn Radio Frequency Superconducting Cavities at Peking University

Stable Acceleration of a LHe-Free Nb 3 Sn demo SRF e-linac

Improving Interface Physics Understanding in High-Frequency Cryogenic Normal Conducting Cavities

High-Q operation of SRF cavities: The potential impact of thermocurrents on the RF surface resistance

The Rise of Ingot Niobium as a Material for Superconducting Radiofrequency Accelerating Cavities

High and high gradient performance of the first medium-temperature baking 1.3 GHz cryomodule

Superconducting RF cavity R&D for future accelerators

High gradients at SRF photoinjector cavities with low RRR copper cathode plug screwed to the cavity back wall

An Advanced NCRF Linac Concept for a High Energy e$^+$e$^-$ Linear Collider

A Hybrid Cryocooler Achieving 1.8 K with He-4 As the Only Working Medium and Its Application Verification