Abstract:This comprehensive study, being part of the European XFEL R\&D effort, elucidates the influence of medium temperature (mid-T) heat treatments between 250°C and 350°C on the performance of 1.3~GHz superconducting radiofrequency (SRF) niobium cavities. Utilizing a refurbished niobium retort furnace equipped with an inter-vacuum chamber and cryopumps at DESY, we have embarked on an investigation to enhance the state-of-the-art SRF cavity technology. Our research reveals that mid-T heat treatments significantly boost the quality factor ($Q_0$) of the cavities, achieving values between $2\cdot10^{10}$ to $5\cdot10^{10}$ at field strengths around 16~MV/m, while the maximum field strengths are limited to 25-35~MV/m and enhanced sensitivity to trapped magnetic flux is observed. Moreover, we delve into the effects of surface impurity concentration changes, particularly the diffusion of oxygen content, and its impact on performance enhancements. By categorizing treatments based on calculated diffusion lengths using the whole temperature profile, we recognize patterns that suggest an optimal diffusion length conducive to optimizing cavity performance. SIMS results from samples confirm the calculated oxygen diffusion lengths in most instances. Deviations are primarily attributed to grain boundaries in fine-grain materials, necessitating repeated measurements on single-crystal materials to further investigate this phenomenon. Investigations into cooling rates and the resulting spatial temperature gradients across the cavities ranging from 0.04 to 0.2~K/mm reveal no significant correlation with performance following a mid-T heat treatment. However, the increased sensitivity to trapped magnetic flux leads to new challenges in the quest for next-generation accelerator technologies since the requirement for magnetic hygiene gets stricter.

High-Q operation of SRF cavities: The potential impact of thermocurrents on the RF surface resistance

Role of thermal resistance on the performance of superconducting radio frequency cavities

Coaxial multi-mode cavities for fundamental SRF research in an unprecedented parameter space

Improving Interface Physics Understanding in High-Frequency Cryogenic Normal Conducting Cavities

Magnetic Flux Dynamics in Horizontally Cooled Superconducting Cavities

Correlation of srf performance to oxygen diffusion length of medium temperature heat treated cavities

High resolution diagnostic tools for superconducting radio frequency cavities

Efficient expulsion of magnetic flux in superconducting RF cavities for high $Q_0$ applications

Multi-mode Analysis of Surface Losses in a Superconducting Microwave Resonator in High Magnetic Fields

Ultra-Low Surface Resistance via Vacuum Heat Treatment of Superconducting Radiofrequency Cavities

Stable CW Operation of Nb$_3$Sn SRF Cavity at 10 MV/m using Conduction Cooling

New Results of Development on High Efficiency High Gradient Superconducting RF Cavities

A new first-principles calculation of field-dependent RF surface impedance of BCS superconductor and application to SRF cavities

Analysis of post wet chemistry heat treatment effects on Nb SRF surface resistance

Development of a prototype superconducting radio-frequency cavity for conduction-cooled accelerators

Sensitivity of Niobium Superconducting Cavities to Trapped Magnetic Flux Dissipation

Superconducting RF cavity R&D for future accelerators

Development of a cryocooler conduction-cooled 650 MHz SRF cavity operating at ~10 MV/m cw accelerating gradient

Role of microstructure on flux expulsion of superconducting radio frequency cavities

Advanced surface treatments for medium-velocity superconducting RF cavities for high accelerating gradient continuous-wave operation

Characterizing materials for superconducting radiofrequency applications-A comprehensive overview of the quadrupole resonator design and measurement capabilities