Abstract:The MgB2 coated superconducting tapes have been fabricated on textured Cu (0 0 1) and polycrystalline Hastelloy tapes using coated conductor technique, which has been developed for the second generation high temperature superconducting wires. The MgB2/Cu tapes were fabricated over a wide temperature range of 460-520 °C by using hybrid physical-chemical vapor deposition (HPCVD) technique. The tapes exhibited the critical temperatures (Tc) ranging between 36 and 38 K with superconducting transition width (\DeltaTc) of about 0.3-0.6 K. The highest critical current density (Jc) of 1.34 \times 105 A/cm2 at 5 K under 3 T is obtained for the MgB2/Cu tape grown at 460^{\circ}C. To further improve the flux pinning property of MgB2 tapes, SiC is coated as an impurity layer on the Cu tape. In contrast to pure MgB2/Cu tapes, the MgB2 on SiC-coated Cu tapes exhibited opposite trend in the dependence of Jc with growth temperature. The improved flux pinning by the additional defects created by SiC-impurity layer along with the MgB2 grain boundaries lead to strong improvement in Jc for the MgB2/SiC/Cu tapes. The MgB2/Hastelloy superconducting tapes fabricated at a temperature of 520 °C showed the critical temperatures ranging between 38.5 and 39.6 K. We obtained much higher Jc values over the wide field range for MgB2/Hastelloy tapes than the previously reported data on other metallic substrates, such as Cu, SS, and Nb. The Jc values of Jc(20 K, 0 T) \sim5.8 \times 106 A/cm2 and Jc(20 K, 1.5 T) ~2.4 \times 105 A/cm2 is obtained for the 2-\mum-thick MgB2/Hastelloy tape. This paper will review the merits of coated conductor approach along with the HPCVD technique to fabricate MgB2 conductors with high Tc and Jc values which are useful for large scale applications.

MgB$_{2}$ Coating by HPCVD for 1.3-GHz Superconducting RF Cavities

MgB2films Fabricated on Molybdenum Substrate by Hybrid Physical–chemical Vapor Deposition for Superconducting RF Cavity Applications

High quality MgB2/Nb deposited by HPCVD method

MgB2 Superconducting Films Fabricated on Copper Substrate by Hybrid Physical-Chemical Vapor Deposition

Fabrication and Radio Frequency Test of Large-Area MgB2 Films on Niobium Substrates

HPCVD Thin Film MgB2 for Superconducting Magnetic Shielding

Multi-metallic conduction cooled superconducting radio-frequency cavity with high thermal stability

MgB2 thick film with TC = 40.2 K deposited on sapphire substrate

Superconducting Mgb2 Thin Films On Silicon Carbide Substrates By Hybrid Physical-Chemical Vapor Deposition

Growth of MgB2 Thin Film Fabricated on Mg Substrate by Hybrid Physical-Chemical Vapor Deposition

Wafer-Scale MgB2 Superconducting Devices

A Study on the Components of MgB2 Thick Film Prepared Via HPCVD

First Results from Nb3Sn Coatings of 2.6 GHz Nb SRF Cavities Using DC Cylindrical Magnetron Sputtering System

MgB2 Thick Films on Three-Dimensional Structures Fabricated by HPCVD

Hybrid Physical-Chemical Vapor Deposition of Ultrathin Mgb2 Films on Mgo Substrate with High T-C and J(C)

Deposition of Mgb2 Superconducting Films on Different Metal Substrates

GROWTH AND PROPERTIES OF SUPERCONDUCTING MgB_2 THIN FILM FABRICATED ON Al_2O_3 SUBSTRATE BY HYBRID PHYSICAL CHEMICAL VAPOR DEPOSITION

In Situ Epitaxial MgB2 Thin Films for Superconducting Electronics

Continuous Wave Mode Test of Conduction-Cooled Nb3Sn Radio Frequency Superconducting Cavities at Peking University

MgB2 coated superconducting tapes with high critical current densities fabricated by hybrid physical-chemical vapor deposition