Abstract:Point contact tunneling (PCT) spectroscopy measurements are reported over wide areas of cm-sized cut outs from niobium superconducting RF cavities. A comparison is made between a high-quality, conventionally processed (CP) cavity with a high field Q drop for acceleration field E $>$ 20 MV/m and a nitrogen doped (N-doped) cavity that exhibits an increasing Q up to fields approaching 15 MV/m. The CP cavity displays hot spot regions at high RF fields where Q-drop occurs as well as unaffected regions (cold spots). PCT data on cold spots reveals a near ideal BCS density of states (DOS) with gap parameters, $\Delta$ as high as 1.62 meV, that are among the highest values ever reported for Nb. Hot spot regions exhibit a wide distribution of gap values down to $\Delta \sim$ 1.0 meV and DOS broadening characterized by a relatively large value of pair-breaking rate, $\Gamma$, indicating surface regions of significantly reduced superconductivity. In addition, hot spots commonly exhibit Kondo tunneling peaks indicative of surface magnetic moments attributed to a defective oxide. N-doped cavities reveal a more homoegeneous gap distribution centered at $\Delta \sim$ 1.5 meV and relatively small values of $\Gamma/\Delta$. The absence of regions of significantly reduced superconductivity indicates that the N interstitials are playing an important role in preventing the formation of hydride phases and other macroscopic defects which might otherwise severely affect the local, surface superconductivity that lead to hot spot formation. The N-doped cavities also display a significantly improved surface oxide, i.e., increased thickness and tunnel barrier height, compared to CP cavities. These results help explain the improved performance of N-doped cavities and give insights into the origin of the initial increasing Q with RF amplitude.

Superconducting niobium cavities of improved thermal conductivity

The Rise of Ingot Niobium as a Material for Superconducting Radiofrequency Accelerating Cavities

Influence of material parameters on the performance of niobium based superconducting RF cavities

A Path to Higher Q0 with Large Grain Niobium Cavities

Multi-metallic conduction cooled superconducting radio-frequency cavity with high thermal stability

New Results of Development on High Efficiency High Gradient Superconducting RF Cavities

Unprecedented Quality Factors at Accelerating Gradients up to 45 MV/m in Niobium Superconducting Resonators via Low Temperature Nitrogen Infusion

Temperature Mapping on a Niobium-Coated Copper Superconducting Radio-Frequency Cavity

Accelerating fields up to 49 MV/m in TESLA-shape superconducting RF niobium cavities via 75C vacuum bake

SRF Cavity Fabrication and Materials

Development of a prototype superconducting radio-frequency cavity for conduction-cooled accelerators

Effective medium temperature baking of 1.3 GHz single cell SRF cavities

Metallurgical and Technological Request for High Purity Niobium in SRF Application

Insight into bulk niobium superconducting RF cavities performances by tunneling spectroscopy

Studies on the Improvement of Niobium-Sputtered Quarter Wave Resonator Superconducting Cavity

Nitrogen and argon doping of niobium for superconducting radio frequency cavities: a pathway to highly efficient accelerating structures

Sensitivity of Niobium Superconducting Cavities to Trapped Magnetic Flux Dissipation

Effect of high temperature heat treatments on the quality factor of a large-grain superconducting radio-frequency niobium cavity

Demonstration of Niobium Tin in 218 MHz Low-beta Quarter Wave Accelerator Cavity

Superconducting DC and RF Properties of Ingot Niobium

Performance Improvment of RF Superconducting Cavity