Abstract:As a result of a collaboration between Jefferson Lab and niobium manufacturer CBMM, ingot niobium was explored as a possible material for superconducting radiofrequency (SRF) cavity fabrication. The first single cell cavity from large grain high purity niobium was fabricated and successfully tested at Jefferson Lab in 2004. This pioneering work triggered research activities in other SRF laboratories around the world. Large grain niobium became not only an interesting alternative material for cavity builders, but also material scientists and surface scientists were eager to participate in the development of this material. Most of the original expectations for this material of being less costly and allowing less expensive fabrication and treatment procedures at the same performance levels in cavities have been met. Many single cell cavities made from material of different suppliers have been tested successfully and several multi-cell cavities have shown the performances comparable to the best cavities made from standard poly-crystalline niobium. Several 9-cell cavities fabricated by Research Instruments and tested at DESY exceeded the best performing fine grain cavities with a record accelerating gradient of Eacc = 45.6 MV/m. Recently- at JLab- by using a new furnace treatment procedure a single cell cavity made of ingot niobium performed at a remarkably high Q0-value (~5x10^10) at an accelerating gradient of ~20 MV/m, at 2K. Such performance levels push the state-of-the art of SRF technology to new limits and are of great interest for future accelerators. This contribution reviews the development of ingot niobium technology and attempts to make a case for this material being the choice for future accelerators.

Demonstration of Niobium Tin in 218 MHz Low-beta Quarter Wave Accelerator Cavity

Nb3Sn multicell cavity coating system at JLAB

The Rise of Ingot Niobium as a Material for Superconducting Radiofrequency Accelerating Cavities

Nb Sputtered 325 MHz QWR Cavities for CIADS

Medium grain niobium SRF cavity production technology for science frontiers and accelerator applications

Demonstration of CW accelerating gradients on a cryogen-free, cryocooler conduction-cooled SRF cavity

Medium-Grain Niobium SRF Cavity Production Technology for Science Frontiers and Accelerator Applications

Flux Expulsion and Material Properties of Niobium Explored in 644-650 MHz Cavities

Development and Understanding of Nb$_3$Sn films for radiofrequency applications through a sample-host 9-cell cavity

First Results from Nb3Sn Coatings of 2.6 GHz Nb SRF Cavities Using DC Cylindrical Magnetron Sputtering System

Stable CW Operation of Nb$_3$Sn SRF Cavity at 10 MV/m using Conduction Cooling

Development and characterization of Nb3Sn/Al2O3 superconducting multilayers for particle accelerators

Analysis of RF losses and material characterization of samples removed from a Nb3Sn-coated superconducting RF cavity

Development of a prototype superconducting radio-frequency cavity for conduction-cooled accelerators

Studies on the Improvement of Niobium-Sputtered Quarter Wave Resonator Superconducting Cavity

Superconducting niobium cavities of improved thermal conductivity

Metallurgical and Technological Request for High Purity Niobium in SRF Application

Influence of material parameters on the performance of niobium based superconducting RF cavities

Development Of High Purity Niobium Used In Srf Accelerating Cavity

Smooth, homogeneous, high-purity Nb3Sn superconducting RF resonant cavity by seed-free electrochemical synthesis

R&d on the niobium-copper superconducting cavity