Abstract:As a result of a collaboration between Jefferson Lab and niobium manufacturer CBMM, ingot niobium was explored as a possible material for superconducting radiofrequency (SRF) cavity fabrication. The first single cell cavity from large grain high purity niobium was fabricated and successfully tested at Jefferson Lab in 2004. This pioneering work triggered research activities in other SRF laboratories around the world. Large grain niobium became not only an interesting alternative material for cavity builders, but also material scientists and surface scientists were eager to participate in the development of this material. Most of the original expectations for this material of being less costly and allowing less expensive fabrication and treatment procedures at the same performance levels in cavities have been met. Many single cell cavities made from material of different suppliers have been tested successfully and several multi-cell cavities have shown the performances comparable to the best cavities made from standard poly-crystalline niobium. Several 9-cell cavities fabricated by Research Instruments and tested at DESY exceeded the best performing fine grain cavities with a record accelerating gradient of Eacc = 45.6 MV/m. Recently- at JLab- by using a new furnace treatment procedure a single cell cavity made of ingot niobium performed at a remarkably high Q0-value (~5x10^10) at an accelerating gradient of ~20 MV/m, at 2K. Such performance levels push the state-of-the art of SRF technology to new limits and are of great interest for future accelerators. This contribution reviews the development of ingot niobium technology and attempts to make a case for this material being the choice for future accelerators.

Nb3Sn multicell cavity coating system at JLAB

Development and Understanding of Nb$_3$Sn films for radiofrequency applications through a sample-host 9-cell cavity

First Results from Nb3Sn Coatings of 2.6 GHz Nb SRF Cavities Using DC Cylindrical Magnetron Sputtering System

Commissioning of Dedicated Furnace for Nb3Sn Coatings of 2.6 GHz Single Cell Cavities

Demonstration of Niobium Tin in 218 MHz Low-beta Quarter Wave Accelerator Cavity

Development and characterization of Nb3Sn/Al2O3 superconducting multilayers for particle accelerators

Preservation of the High Quality Factor and Accelerating Gradient of Nb3Sn-coated Cavity During Pair Assembly

Analysis of RF losses and material characterization of samples removed from a Nb3Sn-coated superconducting RF cavity

Development of a prototype superconducting radio-frequency cavity for conduction-cooled accelerators

Grain-boundary structure and segregation in Nb3Sn coatings on Nb for high-performance superconducting radiofrequency cavity applications

Initial Growth Of Tin On Niobium For Vapor Diffusion Coating Of Nb3sn

Influence of Nb substrate morphology and atomic structure on Sn nucleation and early Nb 3 Sn growth

Smooth, homogeneous, high-purity Nb3Sn superconducting RF resonant cavity by seed-free electrochemical synthesis

The Rise of Ingot Niobium as a Material for Superconducting Radiofrequency Accelerating Cavities

Understanding and optimization of the coating process of the radio-frequency Nb 3 Sn thin film superconducting cavities using tin vapor diffusion method

Stable CW Operation of Nb$_3$Sn SRF Cavity at 10 MV/m using Conduction Cooling

On the quest of low temperature nitrogen infusion relevant for superconducting Nb based radio-frequency cavities

Improvement and protection of niobium surface superconductivity by atomic layer deposition and heat treatment

Medium-Grain Niobium SRF Cavity Production Technology for Science Frontiers and Accelerator Applications

Industrial Fabrication of Medium-Beta SCRF Cavities for a High-Intensity Proton Linac

Medium grain niobium SRF cavity production technology for science frontiers and accelerator applications