Abstract:Nanoscale structural defects such as grain boundaries, atomic dislocations, and surface roughness inhibit the stoichiometrically homogeneous growth of Nb3Sn on Nb. This is a critical technological bottleneck for the implementation of next-generation Nb3Sn superconducting radio frequency cavities, as thin film inhomogeneities are known to degrade superconducting properties that are essential for reaching optimal cavity performance. To determine the influence of structural defects on Nb3Sn film growth, low and moderate surface defect densities were intentionally induced onto a (3 × 1)-O Nb(100) substrate, which serves as a model system to study atomic-scale Sn adsorption and diffusion. Scanning tunneling microscopy shows that, while initial Sn adsorption behavior at room temperature differs between the low and moderate defect density Nb(100) surfaces, the overall diffusion pathways at elevated temperatures are guided by the underlying oxide structure with variations resulting from increased nanoscale surface defects. The (3 × 1)-O Nb(100) surface with a moderate defect density also demonstrates enhanced Sn thermal stability, with the Sn desorption threshold occurring between 850 and 900 °C, approximately 50 °C higher than desorption from both the low defect density and pristine thin oxide surfaces. This suggests that structural surface defects may stabilize adsorbed Sn species on oxidized Nb at the elevated temperatures utilized in Nb3Sn alloy growth procedures. Auger electron spectroscopy shows no significant difference in surface composition following Sn deposition at varying coverages on the pristine and defect-induced (3 × 1)-O Nb(100) surfaces. This indicates that the surface and near-surface composition are not influenced by the presence of nanoscale surface defects despite slight attenuations in Sn diffusion pathways on defected substrates. These results provide the first in situ visualization of Sn adsorption and diffusion behavior on oxidized Nb at the nanoscale, revealing the significance of the underlying Nb oxide surface structure and defect density on Nb3Sn film growth and, ultimately, cavity performance.

Grain-boundary structure and segregation in Nb3Sn coatings on Nb for high-performance superconducting radiofrequency cavity applications

Development and Understanding of Nb$_3$Sn films for radiofrequency applications through a sample-host 9-cell cavity

Influence of Nb substrate morphology and atomic structure on Sn nucleation and early Nb 3 Sn growth

Understanding and optimization of the coating process of the radio-frequency Nb 3 Sn thin film superconducting cavities using tin vapor diffusion method

Selective thermal evolution of native oxide layer in Nb and Nb3Sn-coated SRF grade Nb: An in-situ angular XPS study

Analysis of Magnetic Vortex Dissipation in Sn-Segregated Boundaries in Nb$_3$Sn Superconducting RF Cavities

Unveiling the nucleation and growth of Zr oxide precipitates of internally oxidized Nb3Sn superconductors

Development and characterization of Nb3Sn/Al2O3 superconducting multilayers for particle accelerators

Role of nanoscale surface defects on Sn adsorption and diffusion behavior on oxidized Nb(100)

Development of low angle grain boundaries in lightly deformed superconducting niobium and their influence on hydride distribution and flux perturbation

Analysis of Thermal Grooving Effects on Vortex Penetration in Vapor-Diffused Nb3Sn

Surface oxides, carbides, and impurities on RF superconducting Nb and Nb3Sn: A comprehensive analysis

Unraveling the Nanoscale Segregation Mechanism in N-Doped Niobium for Enhanced SRF Performance

On the quest of low temperature nitrogen infusion relevant for superconducting Nb based radio-frequency cavities

Comparative study on the strain-dependent mechanical and electronic properties of Nb<sub>3</sub>Al and Nb<sub>3</sub>Sn

Smooth, homogeneous, high-purity Nb3Sn superconducting RF resonant cavity by seed-free electrochemical synthesis

Analysis of RF losses and material characterization of samples removed from a Nb3Sn-coated superconducting RF cavity

First Results from Nb3Sn Coatings of 2.6 GHz Nb SRF Cavities Using DC Cylindrical Magnetron Sputtering System

Magnetic properties and hydrides precipitation observation of nitrogen doping niobium used for accelerator applications

Study on preparation of Nb<sub>3</sub>Sn films by bronze route

Commissioning of Dedicated Furnace for Nb3Sn Coatings of 2.6 GHz Single Cell Cavities