Abstract:The technological and metallurgical requirements of material for highgradient superconducting cavities are described. High-purity niobium, as the preferred metal for the fabrication of superconducting accelerating cavities, should meet exact specifications. The content of interstitial impurities such as oxygen, nitrogen, and carbon must be below 10{\mu}g/g. The hydrogen content should be kept below 2{\mu}g/g to prevent degradation of the Q-value under certain cool-down conditions. The material should be free of flaws (foreign material inclusions or cracks and laminations) that can initiate a thermal breakdown. Defects may be detected by quality control methods such as eddy current scanning and identified by a number of special methods. Conventional and alternative cavity fabrication methods are reviewed. Conventionally, niobium cavities are fabricated from sheet niobium by the formation of half-cells by deep drawing, followed by trim machining and Electron-Beam Welding (EBW). The welding of half-cells is a delicate procedure, requiring intermediate cleaning steps and a careful choice of weld parameters to achieve full penetration of the joints. The equator welds are particularly critical. A challenge for a welded construction is the tight mechanical and electrical tolerances. These can be maintained by a combination of mechanical and radio-frequency measurements on halfcells and by careful tracking of weld shrinkage. The established procedure is suitable for large series production. The main aspects of quality assurance management are mentioned. Another cavity fabrication approach is slicing discs from the ingot and producing cavities by deep drawing and EBW. Accelerating gradients at the level of 35-45 MV.m-1 can be achieved by applying Electropolishing (EP) treatment....

Preservation of the High Quality Factor and Accelerating Gradient of Nb3Sn-coated Cavity During Pair Assembly

Nb3Sn multicell cavity coating system at JLAB

Commissioning of Dedicated Furnace for Nb3Sn Coatings of 2.6 GHz Single Cell Cavities

First Results from Nb3Sn Coatings of 2.6 GHz Nb SRF Cavities Using DC Cylindrical Magnetron Sputtering System

Development and Understanding of Nb$_3$Sn films for radiofrequency applications through a sample-host 9-cell cavity

Advanced surface treatments for medium-velocity superconducting RF cavities for high accelerating gradient continuous-wave operation

Healing Gradient Degradation in Nb3Sn SRF Cavities Using a Recoating Method

First Results From Nanoindentation of Vapor Diffused Nb3Sn Films on Nb

Grain-boundary structure and segregation in Nb3Sn coatings on Nb for high-performance superconducting radiofrequency cavity applications

Analysis of RF losses and material characterization of samples removed from a Nb3Sn-coated superconducting RF cavity

Development and characterization of Nb3Sn/Al2O3 superconducting multilayers for particle accelerators

Demonstration of Niobium Tin in 218 MHz Low-beta Quarter Wave Accelerator Cavity

Development of a prototype superconducting radio-frequency cavity for conduction-cooled accelerators

Nitrogen Doping/infusion of 650 MHz Cavities for CEPC

SRF Cavity Fabrication and Materials

Analysis of Thermal Grooving Effects on Vortex Penetration in Vapor-Diffused Nb3Sn

Unprecedented Quality Factors at Accelerating Gradients up to 45 MV/m in Niobium Superconducting Resonators via Low Temperature Nitrogen Infusion

Understanding and optimization of the coating process of the radio-frequency Nb 3 Sn thin film superconducting cavities using tin vapor diffusion method

Initial Growth Of Tin On Niobium For Vapor Diffusion Coating Of Nb3sn

Development and Vertical Tests of CEPC 650-MHz Single-Cell Cavities with High Gradient

Q-factor optimization for high-beta 650 MHz cavities for PIP-II