Abstract:The effect of coating cracking during depth-sensing indentation testing (e.g. nanoindentation testing) on systems comprising thin hard coatings (e.g. TiN) on a less stiff, hard substrate (e.g. steel) has been investigated in order to establish whether, at such small scales, the occurrence of annular through-thickness cracks around indentation sites can be detected from load–displacement plots and whether any accompanying localized debonding of the coating from the substrate can also be identified. Experiments were performed on thin TiN and NbN monolayers, and compositionally modulated TiN/NbN and TiN/ZrN deposited onto hard steel or stainless steel substrates. Above a critical load (Pcrit) in the range 80–500mN, all systems exhibited annular through-thickness cracks around indentation sites. The cracking was found to be accompanied by a discrete change in gradient of the loading portion of the load–displacement curve. Also, analysis of the unloading curves beyond this point showed that elastic recovery was controlled by the elastic modulus of the underlying substrate material alone. The cracking mechanism has been characterized using scanning electron microscopy, coupled with optical profilometry to map the detailed z-displacement of the surface — a procedure critical to understanding whether coating–substrate debonding had occurred. Some cracks were found to show a spiral morphology and the effect of indentation loading rate was investigated to see if appearance of these cracks was loading-rate sensitive. Our results highlight the problems inherent in assessing both the interfacial failure and the interfacial fracture toughness of thin film coated systems at the small contact scales (⩽1μm) associated with crack genesis where it is difficult to confirm the extent of sub-surface cracks by conventional means. We have also demonstrated that both load–displacement and load–displacement squared plots are necessary if a more complete understanding of system behaviour is to be gained. Also, a simple fracture mechanics model for the annular cracking behaviour seen in such systems has been derived and used to estimate a value of Gic (the interfacial work of fracture) as 180Jm−2 for the TiN/ZrN-stainless steel system.

First Results From Nanoindentation of Vapor Diffused Nb3Sn Films on Nb

Development and Understanding of Nb$_3$Sn films for radiofrequency applications through a sample-host 9-cell cavity

In Situ Nanoindentation Mechanical Property of Films by Atomic Force Microscope

Nanomechanical inhomogeneities in CVA-deposited titanium nitride thin films: Nanoindentation and Finite Element Method Investigations

Indentation of Coatings at micro/nano scale: Crack formation and deflection

Initial Growth Of Tin On Niobium For Vapor Diffusion Coating Of Nb3sn

Influence of Nb substrate morphology and atomic structure on Sn nucleation and early Nb 3 Sn growth

Analysis of Thermal Grooving Effects on Vortex Penetration in Vapor-Diffused Nb3Sn

Preservation of the High Quality Factor and Accelerating Gradient of Nb3Sn-coated Cavity During Pair Assembly

Analysis of RF losses and material characterization of samples removed from a Nb3Sn-coated superconducting RF cavity

Measurements of the first-flux-penetration field in surface-treated and coated Nb: Distinguishing between surface pinning and an interface energy barrier

Role of nanoscale surface defects on Sn adsorption and diffusion behavior on oxidized Nb(100)

Nb3Sn multicell cavity coating system at JLAB

Understanding and optimization of the coating process of the radio-frequency Nb 3 Sn thin film superconducting cavities using tin vapor diffusion method

Commissioning of Dedicated Furnace for Nb3Sn Coatings of 2.6 GHz Single Cell Cavities

Nanoindentation study of Ni45Nb55 amorphous films prepared by ion beam assisted deposition

Grain-boundary structure and segregation in Nb3Sn coatings on Nb for high-performance superconducting radiofrequency cavity applications

Experimental Tests and Numerical Simulation Studies on Nano-Indentation of Tin Film Deposited on N+-Implanted Aluminum

The effect of coating cracking on the indentation response of thin hard-coated systems

Selective thermal evolution of native oxide layer in Nb and Nb3Sn-coated SRF grade Nb: An in-situ angular XPS study

Nanoindentation of Porous Bulk and Thin Films of LSCF